Cost to Drywall Installation in Boston, MA

$1,320–$6,600 in Boston

32% above the national average · 1.32x cost multiplier

In Boston, a drywall installation runs $1,320 to $6,600 on average — about 32% above what homeowners pay nationwide. The Northeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Boston

Line Item	Low	Mid	High
Cost per sq ft	$2	$3	$5
Materials	$660	$1,188	$2,640
Labor	$924	$1,848	$4,620
Permits	$0	$0	$396
Total	$1,584+32% vs. national avg	$3,036+32% vs. national avg	$7,656+32% vs. national avg

Budget

New drywall in one room, standard 1/2-inch, basic tape and mud

Mid-Range

Multi-room drywall, includes taping, mudding, and texture coat

Premium

Full basement or addition finish, moisture-resistant board where needed, level 5 finish

Material Options

Material prices below are national averages; availability in Boston may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Standard 1/2-Inch Drywall	$0.40-$0.60/sq ft materials	Most common, widely available, cost-effective, works for most walls	Not moisture or fire resistant in standard form	Interior walls and ceilings in living spacesMost common, widely available, cost-effective, works for most walls
Moisture-Resistant (Green Board)	$0.60-$0.80/sq ft materials	Handles humidity better than standard, good for bathrooms	Not waterproof - not suitable for wet areas like showers	Bathroom walls (non-wet areas), laundry rooms, basementsHandles humidity better than standard, good for bathrooms
Mold-Resistant (Purple Board)	$0.80-$1.00/sq ft materials	Best moisture and mold resistance without cement board	Higher cost, not needed in dry areas	Basements, bathrooms, any area with chronic moisture concernsBest moisture and mold resistance without cement board
5/8-Inch Fire-Rated (Type X)	$0.70-$0.90/sq ft materials	1-hour fire rating, better sound dampening, required by code in some locations	Heavier, harder to work with, higher cost	Garage walls, between dwelling units, required by local code1-hour fire rating, better sound dampening, required by code in some locations
Cement Board	$1.00-$1.80/sq ft materials	Waterproof, required behind tile in wet areas	Heavy, harder to cut, not for dry areas	Shower surrounds, tub decks, any area that gets wet (not drywall at all here)Waterproof, required behind tile in wet areas

Other Projects in Boston

Full Bathroom Remodel

Full Kitchen Remodel

Window Replacement

Back to national average for Drywall Installation

Boston Estimate

Typical Range

$1,320–$6,600

vs. National Average

32% above national

Cost Multiplier

1.32x

Cost Per sq ft

$2–$5

Estimates apply Boston's 1.32x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →