Cost to Crown Molding Installation in San Antonio, TX (2026)
If you’re budgeting a crown molding installation in San Antonio, most projects run $607-$2,601, 13% below the $1,500 national average. What moves that number most is usually one thing: Material Type. On its own it can swing the cost by $2 - $12 per linear foot, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Use MDF or foam molding instead of solid wood - you can't tell the difference once it's painted, and you'll save $2-$5 per linear foot on materials alone.
In the Southeast (where San Antonio sits): Lower labor rates and high availability of trim carpenters keep costs below the national average.
$607-$2,601 in San Antonio
13% below the national average · 0.87x cost multiplier
Expect to pay $607-$2,601 for a crown molding installation in San Antonio, about 13% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Antonio prices.
Cost Breakdown in San Antonio
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $3 | $9 | $16 |
| Materials | $236 | $473 | $1,134 |
| Labor | $321 | $682 | $1,204 |
| Permits | $0 | $0 | $0 |
| Total | $557-14% vs. national avg | $1,155-14% vs. national avg | $2,622-13% vs. national avg |
Budget
MDF or polystyrene foam molding, simple profile, one room (about 60 linear feet), basic paint-grade finish
Mid-Range
Solid wood (pine or poplar) molding, moderate profile detail, 2-3 rooms (about 150 linear feet), professional painting included
Premium
Hardwood (oak, cherry, or mahogany) or multi-piece built-up crown, ornate profiles, whole house (250+ linear feet), stain-grade finish
Material Options
Material prices below are national averages; availability in San Antonio may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Polystyrene Foam | $1 - $3 per linear foot | Budget projects, DIY installations, rooms with minimal visibilityLightweight, easy to cut, won't crack from settling, cheapest option, can be painted |
| MDF (Medium Density Fiberboard) | $1.50 - $4 per linear foot | Paint-grade installations in dry rooms, best price-to-quality ratioSmooth paintable surface, consistent quality, wide profile selection, affordable |
| Pine or Poplar (Softwood) | $2 - $5 per linear foot | Mid-range paint-grade projects, traditional homes, moderate budgetsReal wood look and feel, can be painted or stained (poplar paints better), holds nails well, moderate cost |
| Oak or Maple (Hardwood) | $5 - $10 per linear foot | Stain-grade installations, formal rooms, high-end remodels, craftsman-style homesBeautiful natural grain, extremely durable, stains beautifully, adds real value to a home |
| Polyurethane (High-Density) | $4 - $8 per linear foot | Bathrooms, kitchens, humid climates, homeowners who want ornate profiles without the wood costLooks like real wood, lightweight, moisture resistant, won't crack or rot, very detailed profiles available |
Other Projects in San Antonio
San Antonio Estimate
Typical Range
$607-$2,601
vs. National Average
13% below national
Cost Multiplier
0.87x
Cost Per linear ft
$3-$16
This 0.87x estimate prices San Antonio labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →