Cost to Crown Molding Installation in Philadelphia, PA (2026)
If you’re budgeting a crown molding installation in Philadelphia, most projects run $751-$3,220, 7% above the $1,500 national average. What moves that number most is usually one thing: Material Type. On its own it can swing the cost by $2 - $12 per linear foot, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Use MDF or foam molding instead of solid wood - you can't tell the difference once it's painted, and you'll save $2-$5 per linear foot on materials alone.
In the Northeast (where Philadelphia sits): Higher labor rates in metro areas like Boston and NYC push costs up. Older homes with plaster walls also require more prep work.
$751-$3,220 in Philadelphia
7% above the national average · 1.07x cost multiplier
Expect to pay $751-$3,220 for a crown molding installation in Philadelphia, about 7% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Philadelphia prices.
Cost Breakdown in Philadelphia
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $4 | $11 | $19 |
| Materials | $277 | $555 | $1,332 |
| Labor | $417 | $887 | $1,565 |
| Permits | $0 | $0 | $0 |
| Total | $694+7% vs. national avg | $1,442+7% vs. national avg | $3,230+8% vs. national avg |
Budget
MDF or polystyrene foam molding, simple profile, one room (about 60 linear feet), basic paint-grade finish
Mid-Range
Solid wood (pine or poplar) molding, moderate profile detail, 2-3 rooms (about 150 linear feet), professional painting included
Premium
Hardwood (oak, cherry, or mahogany) or multi-piece built-up crown, ornate profiles, whole house (250+ linear feet), stain-grade finish
Material Options
Material prices below are national averages; availability in Philadelphia may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Polystyrene Foam | $1 - $3 per linear foot | Budget projects, DIY installations, rooms with minimal visibilityLightweight, easy to cut, won't crack from settling, cheapest option, can be painted |
| MDF (Medium Density Fiberboard) | $1.50 - $4 per linear foot | Paint-grade installations in dry rooms, best price-to-quality ratioSmooth paintable surface, consistent quality, wide profile selection, affordable |
| Pine or Poplar (Softwood) | $2 - $5 per linear foot | Mid-range paint-grade projects, traditional homes, moderate budgetsReal wood look and feel, can be painted or stained (poplar paints better), holds nails well, moderate cost |
| Oak or Maple (Hardwood) | $5 - $10 per linear foot | Stain-grade installations, formal rooms, high-end remodels, craftsman-style homesBeautiful natural grain, extremely durable, stains beautifully, adds real value to a home |
| Polyurethane (High-Density) | $4 - $8 per linear foot | Bathrooms, kitchens, humid climates, homeowners who want ornate profiles without the wood costLooks like real wood, lightweight, moisture resistant, won't crack or rot, very detailed profiles available |
Other Projects in Philadelphia
Philadelphia Estimate
Typical Range
$751-$3,220
vs. National Average
7% above national
Cost Multiplier
1.07x
Cost Per linear ft
$4-$19
This 1.07x estimate prices Philadelphia labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →