Cost to Crown Molding Installation in Los Angeles, CA (2026)
If you’re budgeting a crown molding installation in Los Angeles, most projects run $799-$3,426, 14% above the $1,500 national average. What moves that number most is usually one thing: Material Type. On its own it can swing the cost by $2 - $12 per linear foot, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Use MDF or foam molding instead of solid wood - you can't tell the difference once it's painted, and you'll save $2-$5 per linear foot on materials alone.
In the West Coast (where Los Angeles sits): Finish carpentry labor rates are among the highest in the country, particularly in the Bay Area, LA, and Seattle.
$799-$3,426 in Los Angeles
14% above the national average · 1.14x cost multiplier
In Los Angeles, a crown molding installation runs $799 to $3,426 on average - about 14% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $5 | $11 | $21 |
| Materials | $294 | $588 | $1,410 |
| Labor | $446 | $948 | $1,673 |
| Permits | $0 | $0 | $0 |
| Total | $740+14% vs. national avg | $1,536+14% vs. national avg | $3,436+15% vs. national avg |
Budget
MDF or polystyrene foam molding, simple profile, one room (about 60 linear feet), basic paint-grade finish
Mid-Range
Solid wood (pine or poplar) molding, moderate profile detail, 2-3 rooms (about 150 linear feet), professional painting included
Premium
Hardwood (oak, cherry, or mahogany) or multi-piece built-up crown, ornate profiles, whole house (250+ linear feet), stain-grade finish
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Polystyrene Foam | $1 - $3 per linear foot | Budget projects, DIY installations, rooms with minimal visibilityLightweight, easy to cut, won't crack from settling, cheapest option, can be painted |
| MDF (Medium Density Fiberboard) | $1.50 - $4 per linear foot | Paint-grade installations in dry rooms, best price-to-quality ratioSmooth paintable surface, consistent quality, wide profile selection, affordable |
| Pine or Poplar (Softwood) | $2 - $5 per linear foot | Mid-range paint-grade projects, traditional homes, moderate budgetsReal wood look and feel, can be painted or stained (poplar paints better), holds nails well, moderate cost |
| Oak or Maple (Hardwood) | $5 - $10 per linear foot | Stain-grade installations, formal rooms, high-end remodels, craftsman-style homesBeautiful natural grain, extremely durable, stains beautifully, adds real value to a home |
| Polyurethane (High-Density) | $4 - $8 per linear foot | Bathrooms, kitchens, humid climates, homeowners who want ornate profiles without the wood costLooks like real wood, lightweight, moisture resistant, won't crack or rot, very detailed profiles available |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$799-$3,426
vs. National Average
14% above national
Cost Multiplier
1.14x
Cost Per linear ft
$5-$21
This 1.14x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →