Cost to Accent Wall Installation in Dallas, TX (2026)
If you’re budgeting a accent wall installation in Dallas, most projects run $359-$1,793, 10% below the $900 national average. What moves that number most is usually one thing: Material Type. On its own it can swing the cost by $100 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Buy shiplap or board-and-batten material from a big-box lumber yard rather than a specialty supplier - pine boards cut to width run $1-$2 per linear foot versus $2-$4 for pre-milled shiplap
In the Southeast (where Dallas sits): Lower labor costs across the region; Florida coastal markets slightly higher.
$359-$1,793 in Dallas
10% below the national average · 0.90x cost multiplier
In Dallas, a accent wall installation runs $359 to $1,793 on average - about 10% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $2 | $7 | $22 |
| Materials | $77 | $483 | $1,737 |
| Labor | $169 | $590 | $1,856 |
| Permits | $0 | $0 | $0 |
| Total | $246-12% vs. national avg | $1,073-11% vs. national avg | $3,593-10% vs. national avg |
Budget
Paint-only accent wall, one contrasting color, standard 12x10 ft wall.
Mid-Range
Board and batten or shiplap installation, 120 sq ft wall, primed and painted.
Premium
Custom millwork paneling, beadboard, or reclaimed wood feature wall, large wall or intricate pattern.
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Paint Only (Accent Color) | $30-$80 per gallon | Renters, low-budget updates, bedrooms where bold color is enoughLowest cost, fastest install, easy to change later, no structural modification |
| Shiplap Boards | $1-$3 per sq ft material | Living rooms, bedrooms, entryways - any space where you want texture without heavy millworkStrong farmhouse and coastal aesthetic, relatively easy DIY install, widely available |
| Board and Batten | $1.50-$4 per sq ft material | Dining rooms, hallways, kids rooms, any space that benefits from a vertical visual elementClassic, versatile look that works in traditional and modern spaces, DIY-friendly |
| Beadboard | $1-$3 per sq ft material | Bathrooms, mudrooms, cottage-style kitchens, lower wainscoting applicationsTraditional grooved texture, works well as wainscoting on lower portion of wall, paintable |
| Stone Veneer Panels | $8-$20 per sq ft material | Fireplace walls, entryways, media walls where a statement material is the goalDramatic, high-end look, durable, works for fireplace surrounds and feature walls |
| Reclaimed Wood / Live Edge | $8-$25 per sq ft material | High-end primary bedrooms, restaurant-quality home bars, design-forward living spacesUnique - no two walls identical, eco-friendly story, warm natural texture |
Other Projects in Dallas
Dallas Estimate
Typical Range
$359-$1,793
vs. National Average
10% below national
Cost Multiplier
0.90x
Cost Per sq ft
$2-$22
This 0.90x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →