Cost to Screened Porch Addition in Dallas, TX (2026)

If you’re budgeting a screened porch addition in Dallas, most projects run $10,426-$34,753, 13% below the $22,000 national average. What moves that number most is usually one thing: Size and Floor Area. On its own it can swing the cost by $6,000 - $60,000+, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Build on an existing concrete patio or wood deck whenever possible - eliminating foundation work saves $4,000-$8,000 on most projects

In the Southeast (where Dallas sits): Lower labor costs; mild climate means no frost footings, reducing foundation cost significantly.

$10,426-$34,753 in Dallas

13% below the national average · 0.87x cost multiplier

In Dallas, a screened porch addition runs $10,426 to $34,753 on average - about 13% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Dallas

Line ItemLowMidHigh
Cost per sq ft$52$130$304
Materials$4,825$11,580$28,950
Labor$5,360$10,721$26,802
Permits$1,448$1,930$2,895
Design$483$965$4,825
Total$12,116-13% vs. national avg$25,196-13% vs. national avg$63,472-13% vs. national avg

Budget

Basic 12x16 ft screened porch attached to existing deck or concrete slab, wood framing, aluminum screen panels, asphalt shingle roof matching house. No new foundation work required. Includes one basic light fixture and no ceiling fan.

Mid-Range

16x20 ft screened porch with new concrete slab, wood or composite decking floor, ceiling fan, exterior-grade lighting, screened windows with full-length aluminum-framed panels. Gabled or shed roof matching existing house roofline with asphalt shingles.

Premium

20x24 ft or larger luxury screened porch, full masonry foundation, composite or TimberTech decking, motorized retractable screens, vaulted or cathedral ceiling with tongue-and-groove pine or cedar, multiple outdoor ceiling fans and lighting, possible 3-season conversion prep with insulated panels.

Material Options

Material prices below are national averages; availability in Dallas may shift costs slightly.

MaterialCost/UnitBest For
Aluminum Screen Frames with Fiberglass Screening$8-$15 per linear ft installedMost screened porches without pets; budget and mid-range buildsIndustry standard, widely available, holds tension well, resists corrosion, easy to rescreen if damaged
Pet-Resistant and Heavy-Duty Fiberglass Screen$12-$20 per linear ft installedHouseholds with dogs or cats; families with young children who push on screens7x stronger than standard fiberglass screening, resists pet clawing and punctures, same visibility as standard screen
Solar/Privacy Screen Mesh$15-$25 per linear ft installedSouth- or west-facing porches in hot climates; homeowners wanting afternoon shadeReduces solar heat gain 40-80%, cuts glare, adds privacy during daylight, reduces UV exposure
Motorized Retractable Screens$800-$2,000 per opening; $4,000-$12,000 full systemPremium outdoor living spaces, vacation homes, homeowners who want maximum flexibility between screened and open-airDisappear completely when not in use, allow full open-air feel, reduce visual clutter, compatible with smart home systems

Other Projects in Dallas

Dallas Estimate

Typical Range

$10,426-$34,753

vs. National Average

13% below national

Cost Multiplier

0.87x

Cost Per sq ft

$52-$304

This 0.87x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →