Cost to Screened Porch Addition in Charlotte, NC (2026)

If you’re budgeting a screened porch addition in Charlotte, most projects run $10,678-$35,592, 11% below the $22,000 national average. What moves that number most is usually one thing: Size and Floor Area. On its own it can swing the cost by $6,000 - $60,000+, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Build on an existing concrete patio or wood deck whenever possible - eliminating foundation work saves $4,000-$8,000 on most projects

In the Southeast (where Charlotte sits): Lower labor costs; mild climate means no frost footings, reducing foundation cost significantly.

$10,678-$35,592 in Charlotte

11% below the national average · 0.89x cost multiplier

Homeowners in Charlotte typically spend $10,678-$35,592 on a screened porch addition, about 11% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Charlotte

Line ItemLowMidHigh
Cost per sq ft$53$133$311
Materials$4,800$11,520$28,800
Labor$5,702$11,404$28,510
Permits$1,440$1,920$2,880
Design$480$960$4,800
Total$12,422-11% vs. national avg$25,804-11% vs. national avg$64,990-11% vs. national avg

Budget

Basic 12x16 ft screened porch attached to existing deck or concrete slab, wood framing, aluminum screen panels, asphalt shingle roof matching house. No new foundation work required. Includes one basic light fixture and no ceiling fan.

Mid-Range

16x20 ft screened porch with new concrete slab, wood or composite decking floor, ceiling fan, exterior-grade lighting, screened windows with full-length aluminum-framed panels. Gabled or shed roof matching existing house roofline with asphalt shingles.

Premium

20x24 ft or larger luxury screened porch, full masonry foundation, composite or TimberTech decking, motorized retractable screens, vaulted or cathedral ceiling with tongue-and-groove pine or cedar, multiple outdoor ceiling fans and lighting, possible 3-season conversion prep with insulated panels.

Material Options

Material prices below are national averages; availability in Charlotte may shift costs slightly.

MaterialCost/UnitBest For
Aluminum Screen Frames with Fiberglass Screening$8-$15 per linear ft installedMost screened porches without pets; budget and mid-range buildsIndustry standard, widely available, holds tension well, resists corrosion, easy to rescreen if damaged
Pet-Resistant and Heavy-Duty Fiberglass Screen$12-$20 per linear ft installedHouseholds with dogs or cats; families with young children who push on screens7x stronger than standard fiberglass screening, resists pet clawing and punctures, same visibility as standard screen
Solar/Privacy Screen Mesh$15-$25 per linear ft installedSouth- or west-facing porches in hot climates; homeowners wanting afternoon shadeReduces solar heat gain 40-80%, cuts glare, adds privacy during daylight, reduces UV exposure
Motorized Retractable Screens$800-$2,000 per opening; $4,000-$12,000 full systemPremium outdoor living spaces, vacation homes, homeowners who want maximum flexibility between screened and open-airDisappear completely when not in use, allow full open-air feel, reduce visual clutter, compatible with smart home systems

Other Projects in Charlotte

Charlotte Estimate

Typical Range

$10,678-$35,592

vs. National Average

11% below national

Cost Multiplier

0.89x

Cost Per sq ft

$53-$311

This 0.89x estimate prices Charlotte labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →