Cost to Pergola / Gazebo Installation in Los Angeles, CA (2026)
If you’re budgeting a pergola / gazebo installation in Los Angeles, most projects run $1,776-$14,206, 18% above the $5,500 national average. What moves that number most is usually one thing: Size. On its own it can swing the cost by $500 - $20,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Buy a pergola kit instead of sourcing raw lumber. Kit lumber is pre-cut, pre-notched, and often pre-drilled. The time savings in cutting and fitting makes the modest kit premium worthwhile.
$1,776-$14,206 in Los Angeles
18% above the national average · 1.18x cost multiplier
In Los Angeles, a pergola / gazebo installation runs $1,776 to $14,206 on average - about 18% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $12 | $41 | $89 |
| Materials | $1,645 | $3,290 | $7,638 |
| Labor | $0 | $2,635 | $6,588 |
| Permits | $0 | $235 | $470 |
| Total | $1,645+18% vs. national avg | $6,160+18% vs. national avg | $15,636+18% vs. national avg |
Budget
10x10 prefab cedar or vinyl pergola kit - self-assembly on existing patio, no electrical or posts set in concrete
Mid-Range
12x16 professionally installed cedar or pressure-treated pergola with concrete footings, climbing plant cables, no roofing
Premium
16x20 custom cedar or composite louvered pergola with motorized louvers, integrated lighting, fans, concrete footings, and polycarbonate or metal roof panels
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Pressure-Treated Pine | $10 - $20 per sq ft installed | Budget builds where cost is the primary factor and maintenance is acceptableLowest cost, widely available, structurally strong |
| Cedar | $20 - $40 per sq ft installed | Most homeowners who want a quality wood pergola - the best value combination of cost, looks, and durabilityBeautiful natural appearance, naturally rot-resistant, lighter than PT pine, smells great, holds paint/stain well |
| Vinyl / PVC | $25 - $50 per sq ft installed | Homeowners who want a maintenance-free pergola and prefer a clean, white aestheticZero maintenance - never paints, stains, or rots, consistent color, durable |
| Aluminum (Powder-Coated) | $35 - $75 per sq ft installed | Modern and contemporary homes where a clean, low-maintenance structure is the goalVery durable, lightweight, never rots or splinters, modern look, can accommodate motorized louvers |
| Composite / Fiberglass | $30 - $60 per sq ft installed | Homeowners who want a wood-look pergola with minimal maintenanceDurable, low maintenance, can mimic wood grain, consistent color |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$1,776-$14,206
vs. National Average
18% above national
Cost Multiplier
1.18x
Cost Per sq ft
$12-$89
This 1.18x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →