Cost to Fire Pit Installation in Phoenix, AZ (2026)
If you’re budgeting a fire pit installation in Phoenix, most projects run $286-$4,294, 5% below the $1,200 national average. What moves that number most is usually one thing: Wood-Burning vs. Gas. On its own it can swing the cost by $500 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Use standard concrete retaining wall blocks instead of decorative manufactured stone. They look nearly identical from a distance and cost 60-70% less.
$286-$4,294 in Phoenix
5% below the national average · 0.95x cost multiplier
In Phoenix, a fire pit installation runs $286 to $4,294 on average - about 5% below what homeowners pay nationwide. The Mountain West market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Phoenix
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per unit | $95 | $1145 | $9542 |
| Materials | $244 | $780 | $3,413 |
| Labor | $0 | $644 | $2,300 |
| Permits | $0 | $98 | $195 |
| Total | $244-2% vs. national avg | $1,522-5% vs. national avg | $6,298-5% vs. national avg |
Budget
DIY stacked stone or prefab steel fire ring on existing patio - no professional labor needed
Mid-Range
Custom stone or block fire pit with seating wall, gravel base, and proper safety clearances - professionally installed
Premium
Custom natural stone fire pit with built-in seating, gas line connection, lava rock or glass media, and integrated patio design
Material Options
Material prices below are national averages; availability in Phoenix may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Prefab Steel / Cast Iron Fire Ring | $50 - $400 (materials only) | Renters, temporary installations, or homeowners who want a fire pit without a permanent commitmentLowest cost, portable, no installation needed, durable, can be moved |
| Concrete Block or Retaining Wall Block | $150 - $600 (materials only) | DIY homeowners who want a budget custom look - use fire-rated blocks, not standard concrete blocksEasy DIY construction, wide variety of styles, affordable, replaceable if damaged |
| Manufactured Stone / Cultured Stone | $800 - $3,000 installed | Homeowners who want a finished stone look without natural stone pricingNatural stone look at lower cost, consistent sizing, variety of styles, durable with proper fire-rated liner |
| Natural Fieldstone / Flagstone | $2,000 - $6,000 installed | Premium outdoor spaces where the fire pit is a focal point of the landscape designAuthentic natural look, unique character, extremely durable, high-end aesthetic |
| Gas Fire Pit Insert or Table | $500 - $5,000 (unit cost, plus gas line) | Patios and entertaining spaces where convenience and low maintenance are prioritiesConvenient - on/off with a switch, precise flame control, no smoke or ash, works in fire-restricted areas |
Other Projects in Phoenix
Phoenix Estimate
Typical Range
$286-$4,294
vs. National Average
5% below national
Cost Multiplier
0.95x
Cost Per unit
$95-$9542
This 0.95x estimate prices Phoenix labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →