Cost to Open Concept Kitchen Conversion (Wall Removal) in San Jose, CA
$4,830–$20,700 in San Jose
38% above the national average · 1.38x cost multiplier
Expect to pay $4,830–$20,700 for a open concept kitchen conversion (wall removal) in San Jose, about 38% above the national benchmark. The West Coast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Jose prices.
Cost Breakdown in San Jose
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per wall removed | $690 | $2484 | $4830 |
| Materials | $1,656 | $6,210 | $16,560 |
| Labor | $3,036 | $8,970 | $22,080 |
| Permits | $552 | $828 | $1,380 |
| Total | $5,244+38% vs. national avg | $16,698+38% vs. national avg | $42,090+38% vs. national avg |
Budget
Remove a non-load-bearing partition wall. Includes drywall patching, paint, and basic floor repair where wall was removed.
Mid-Range
Remove a load-bearing wall with steel beam or LVL beam installation, temporary support shoring, column or post at ends if needed. Includes drywall, flooring patch, and paint.
Premium
Full structural reconfiguration - multiple walls removed, custom steel beam, flush ceiling integration, electrical/plumbing relocation, high-end finishes throughout affected area.
Material Options
Material prices below are national averages; availability in San Jose may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| LVL Beam (Laminated Veneer Lumber) | $50-$200/linear ft installed | Most residential load-bearing wall removalsStrong, dimensionally stable, widely available, easier to handle than steel |
| Steel I-Beam | $100-$400/linear ft installed | Long spans over 20 feet, flush-ceiling applicationsLonger spans, thinner profile (can be hidden in ceiling), very strong |
| Glulam Beam | $60-$250/linear ft installed | Exposed beam aesthetic in craftsman or farmhouse stylesAesthetically pleasing natural wood look, strong, can be left exposed |
| PSL Beam (Parallel Strand Lumber) | $70-$220/linear ft installed | Heavy load applications, longer spansVery strong, consistent quality, good for high-load applications |
| Non-Load-Bearing Removal (No Beam) | $1,800-$4,000 per wall | Partition walls between rooms with no load aboveLowest cost option, no beam required |
Other Projects in San Jose
San Jose Estimate
Typical Range
$4,830–$20,700
vs. National Average
38% above national
Cost Multiplier
1.38x
Cost Per wall removed
$690–$4830
Estimates apply San Jose's 1.38x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →