Cost to Open Concept Kitchen Conversion (Wall Removal) in Miami, FL
$3,780–$16,200 in Miami
8% above the national average · 1.08x cost multiplier
Homeowners in Miami typically spend $3,780–$16,200 on a open concept kitchen conversion (wall removal), about 8% above the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Miami
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per wall removed | $540 | $1944 | $3780 |
| Materials | $1,296 | $4,860 | $12,960 |
| Labor | $2,376 | $7,020 | $17,280 |
| Permits | $432 | $648 | $1,080 |
| Total | $4,104+8% vs. national avg | $13,068+8% vs. national avg | $32,940+8% vs. national avg |
Budget
Remove a non-load-bearing partition wall. Includes drywall patching, paint, and basic floor repair where wall was removed.
Mid-Range
Remove a load-bearing wall with steel beam or LVL beam installation, temporary support shoring, column or post at ends if needed. Includes drywall, flooring patch, and paint.
Premium
Full structural reconfiguration - multiple walls removed, custom steel beam, flush ceiling integration, electrical/plumbing relocation, high-end finishes throughout affected area.
Material Options
Material prices below are national averages; availability in Miami may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| LVL Beam (Laminated Veneer Lumber) | $50-$200/linear ft installed | Most residential load-bearing wall removalsStrong, dimensionally stable, widely available, easier to handle than steel |
| Steel I-Beam | $100-$400/linear ft installed | Long spans over 20 feet, flush-ceiling applicationsLonger spans, thinner profile (can be hidden in ceiling), very strong |
| Glulam Beam | $60-$250/linear ft installed | Exposed beam aesthetic in craftsman or farmhouse stylesAesthetically pleasing natural wood look, strong, can be left exposed |
| PSL Beam (Parallel Strand Lumber) | $70-$220/linear ft installed | Heavy load applications, longer spansVery strong, consistent quality, good for high-load applications |
| Non-Load-Bearing Removal (No Beam) | $1,800-$4,000 per wall | Partition walls between rooms with no load aboveLowest cost option, no beam required |
Other Projects in Miami
Miami Estimate
Typical Range
$3,780–$16,200
vs. National Average
8% above national
Cost Multiplier
1.08x
Cost Per wall removed
$540–$3780
Estimates apply Miami's 1.08x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →