Cost to Kitchen Plumbing Rough-In in Jacksonville, FL

$1,820$7,735 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a kitchen plumbing rough-in runs $1,820 to $7,735 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line ItemLowMidHigh
Cost per linear ft of pipe$41$86$182
Materials$546$1,638$4,095
Labor$1,092$2,730$6,370
Permits$182$364$546
Total$1,820-9% vs. national avg$4,732-9% vs. national avg$11,011-9% vs. national avg

Budget

Basic sink rough-in with supply and drain lines in same location as existing plumbing. No layout changes.

Mid-Range

Sink relocation, dishwasher stub-out, ice maker line, and new shutoff valves. Moderate pipe rerouting.

Premium

Full kitchen layout change with new sink location, pot filler installation, island plumbing, and complete supply line replacement.

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

MaterialCost/UnitBest For
PEX Pipe (Supply Lines)$0.50-$2/linear ftMost residential remodel supply linesFlexible, freeze-resistant, fast to install, low cost
Copper Pipe (Supply Lines)$2-$8/linear ftPremium remodels, areas where PEX is restrictedProven long-term durability, accepted everywhere, premium finish on exposed runs
ABS Drain Pipe$1-$3/linear ftDrain and waste lines in most residential applicationsLightweight, easy to cut, common and available everywhere
PVC Drain Pipe$0.75-$2.50/linear ftDrain and vent lines, universal acceptanceStrong, widely accepted, chemical resistant
Cast Iron Drain Pipe$3-$9/linear ftPremium builds, multi-story homes where quiet drains matterQuietest drain lines, very long lifespan

Other Projects in Jacksonville

Jacksonville Estimate

Typical Range

$1,820$7,735

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per linear ft of pipe

$41–$182

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →