Cost to Kitchen Cabinet Refacing in Phoenix, AZ (2026)
If you’re budgeting a kitchen cabinet refacing in Phoenix, most projects run $3,822-$11,467, 4% below the $7,500 national average. What moves that number most is usually one thing: Refacing Material Choice. On its own it can swing the cost by $50 - $350 per linear foot difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Compare refacing vs. replacement honestly. Refacing typically costs 40-60% of full replacement. If your cabinet boxes are in good shape and you just want a new look, refacing is a strong value. If the boxes are sagging or damaged, replace.
In the Mountain West (where Phoenix sits): Moderate costs, growing renovation market.
$3,822-$11,467 in Phoenix
4% below the national average · 0.96x cost multiplier
In Phoenix, a kitchen cabinet refacing runs $3,822 to $11,467 on average - about 4% below what homeowners pay nationwide. The Mountain West market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Phoenix
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per linear foot | $96 | $239 | $478 |
| Materials | $1,950 | $4,388 | $7,800 |
| Labor | $1,380 | $2,576 | $3,681 |
| Permits | $0 | $0 | $0 |
| Total | $3,330-5% vs. national avg | $7,159-5% vs. national avg | $11,969-4% vs. national avg |
Budget
Vinyl laminate refacing on 20-25 linear feet, same door style, basic hardware - DIY-friendly option using peel-and-stick veneer
Mid-Range
Wood veneer or thermofoil refacing with new doors, soft-close hinges, updated hardware - professional installation on 20-25 linear feet
Premium
Real wood veneer refacing with custom door style, premium hardware, interior refinishing, and addition of crown molding - 20-25 linear feet
Material Options
Material prices below are national averages; availability in Phoenix may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Vinyl Laminate (Budget DIY) | $50-$150/linear ft | Budget refreshes, rental properties, short-term cosmetic updatesLowest cost, self-install possible with peel-and-stick, wide color range |
| Rigid Thermofoil (RTF) | $100-$250/linear ft installed | Contemporary and modern kitchens wanting a clean flat or shaker-profile lookSmooth uniform finish, easy to clean, moisture-resistant, many color options |
| Wood Veneer | $150-$350/linear ft installed | Traditional and transitional kitchens, homeowners wanting real wood without full replacement costReal wood appearance, can be stained any color, warm authentic look |
| Solid Wood Doors with Veneer Box | $200-$500/linear ft installed | Higher-end refacing projects where appearance is paramountSolid wood door feel and look, paintable and refinishable, premium result |
| Paint-Grade MDF Doors | $120-$300/linear ft installed | Painted kitchen looks - Shaker, flat-front, and profile styles in white/colorSmooth surface ideal for painted finish, dimensionally stable, various profiles |
Other Projects in Phoenix
Phoenix Estimate
Typical Range
$3,822-$11,467
vs. National Average
4% below national
Cost Multiplier
0.96x
Cost Per per linear foot
$96-$478
This 0.96x estimate prices Phoenix labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →