Cost to Kitchen Cabinet Refacing in Los Angeles, CA (2026)
If you’re budgeting a kitchen cabinet refacing in Los Angeles, most projects run $4,732-$14,197, 18% above the $7,500 national average. What moves that number most is usually one thing: Refacing Material Choice. On its own it can swing the cost by $50 - $350 per linear foot difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Compare refacing vs. replacement honestly. Refacing typically costs 40-60% of full replacement. If your cabinet boxes are in good shape and you just want a new look, refacing is a strong value. If the boxes are sagging or damaged, replace.
In the West Coast (where Los Angeles sits): High labor costs, popular renovation option in higher home value markets.
$4,732-$14,197 in Los Angeles
18% above the national average · 1.18x cost multiplier
In Los Angeles, a kitchen cabinet refacing runs $4,732 to $14,197 on average - about 18% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Los Angeles
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per linear foot | $118 | $296 | $592 |
| Materials | $2,350 | $5,288 | $9,400 |
| Labor | $1,797 | $3,354 | $4,791 |
| Permits | $0 | $0 | $0 |
| Total | $4,147+18% vs. national avg | $8,877+18% vs. national avg | $14,779+18% vs. national avg |
Budget
Vinyl laminate refacing on 20-25 linear feet, same door style, basic hardware - DIY-friendly option using peel-and-stick veneer
Mid-Range
Wood veneer or thermofoil refacing with new doors, soft-close hinges, updated hardware - professional installation on 20-25 linear feet
Premium
Real wood veneer refacing with custom door style, premium hardware, interior refinishing, and addition of crown molding - 20-25 linear feet
Material Options
Material prices below are national averages; availability in Los Angeles may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Vinyl Laminate (Budget DIY) | $50-$150/linear ft | Budget refreshes, rental properties, short-term cosmetic updatesLowest cost, self-install possible with peel-and-stick, wide color range |
| Rigid Thermofoil (RTF) | $100-$250/linear ft installed | Contemporary and modern kitchens wanting a clean flat or shaker-profile lookSmooth uniform finish, easy to clean, moisture-resistant, many color options |
| Wood Veneer | $150-$350/linear ft installed | Traditional and transitional kitchens, homeowners wanting real wood without full replacement costReal wood appearance, can be stained any color, warm authentic look |
| Solid Wood Doors with Veneer Box | $200-$500/linear ft installed | Higher-end refacing projects where appearance is paramountSolid wood door feel and look, paintable and refinishable, premium result |
| Paint-Grade MDF Doors | $120-$300/linear ft installed | Painted kitchen looks - Shaker, flat-front, and profile styles in white/colorSmooth surface ideal for painted finish, dimensionally stable, various profiles |
Other Projects in Los Angeles
Los Angeles Estimate
Typical Range
$4,732-$14,197
vs. National Average
18% above national
Cost Multiplier
1.18x
Cost Per per linear foot
$118-$592
This 1.18x estimate prices Los Angeles labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →