Cost to Kitchen Cabinet Refacing in Denver, CO (2026)
If you’re budgeting a kitchen cabinet refacing in Denver, most projects run $4,209-$12,628, 5% above the $7,500 national average. What moves that number most is usually one thing: Refacing Material Choice. On its own it can swing the cost by $50 - $350 per linear foot difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Compare refacing vs. replacement honestly. Refacing typically costs 40-60% of full replacement. If your cabinet boxes are in good shape and you just want a new look, refacing is a strong value. If the boxes are sagging or damaged, replace.
In the Mountain West (where Denver sits): Moderate costs, growing renovation market.
$4,209-$12,628 in Denver
5% above the national average · 1.05x cost multiplier
Expect to pay $4,209-$12,628 for a kitchen cabinet refacing in Denver, about 5% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.
Cost Breakdown in Denver
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per linear foot | $105 | $263 | $526 |
| Materials | $2,120 | $4,770 | $8,480 |
| Labor | $1,558 | $2,907 | $4,153 |
| Permits | $0 | $0 | $0 |
| Total | $3,678+5% vs. national avg | $7,889+5% vs. national avg | $13,163+5% vs. national avg |
Budget
Vinyl laminate refacing on 20-25 linear feet, same door style, basic hardware - DIY-friendly option using peel-and-stick veneer
Mid-Range
Wood veneer or thermofoil refacing with new doors, soft-close hinges, updated hardware - professional installation on 20-25 linear feet
Premium
Real wood veneer refacing with custom door style, premium hardware, interior refinishing, and addition of crown molding - 20-25 linear feet
Material Options
Material prices below are national averages; availability in Denver may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Vinyl Laminate (Budget DIY) | $50-$150/linear ft | Budget refreshes, rental properties, short-term cosmetic updatesLowest cost, self-install possible with peel-and-stick, wide color range |
| Rigid Thermofoil (RTF) | $100-$250/linear ft installed | Contemporary and modern kitchens wanting a clean flat or shaker-profile lookSmooth uniform finish, easy to clean, moisture-resistant, many color options |
| Wood Veneer | $150-$350/linear ft installed | Traditional and transitional kitchens, homeowners wanting real wood without full replacement costReal wood appearance, can be stained any color, warm authentic look |
| Solid Wood Doors with Veneer Box | $200-$500/linear ft installed | Higher-end refacing projects where appearance is paramountSolid wood door feel and look, paintable and refinishable, premium result |
| Paint-Grade MDF Doors | $120-$300/linear ft installed | Painted kitchen looks - Shaker, flat-front, and profile styles in white/colorSmooth surface ideal for painted finish, dimensionally stable, various profiles |
Other Projects in Denver
Denver Estimate
Typical Range
$4,209-$12,628
vs. National Average
5% above national
Cost Multiplier
1.05x
Cost Per per linear foot
$105-$526
This 1.05x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →