How much does a kitchen cabinet refacing cost in Baltimore?

A kitchen cabinet refacing in Baltimore typically costs $4,210-$12,630, 5% above the $7,500 national average.

What is the cost per per linear foot for a kitchen cabinet refacing in Baltimore?

Kitchen Cabinet Refacing in Baltimore typically costs $105-$526 per per linear foot.

How long does a kitchen cabinet refacing take?

A kitchen cabinet refacing typically takes 3-5 days. The minimum timeline is 2 days, and complex projects can run 2 weeks.

Can I DIY a kitchen cabinet refacing?

DIY feasibility for a kitchen cabinet refacing is rated Moderate.

Cost to Kitchen Cabinet Refacing in Baltimore, MD (2026)

If you’re budgeting a kitchen cabinet refacing in Baltimore, most projects run $4,210-$12,630, 5% above the $7,500 national average. What moves that number most is usually one thing: Refacing Material Choice. On its own it can swing the cost by $50 - $350 per linear foot difference, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Compare refacing vs. replacement honestly. Refacing typically costs 40-60% of full replacement. If your cabinet boxes are in good shape and you just want a new look, refacing is a strong value. If the boxes are sagging or damaged, replace.

In the Northeast (where Baltimore sits): Higher labor rates, strong demand in older home stock.

$4,210-$12,630 in Baltimore

5% above the national average · 1.05x cost multiplier

Expect to pay $4,210-$12,630 for a kitchen cabinet refacing in Baltimore, about 5% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Baltimore prices.

Cost Breakdown in Baltimore

Line Item	Low	Mid	High
Cost per per linear foot	$105	$263	$526
Materials	$2,180	$4,905	$8,720
Labor	$1,476	$2,755	$3,935
Permits	$0	$0	$0
Total	$3,656+4% vs. national avg	$7,878+5% vs. national avg	$13,200+6% vs. national avg

Budget

Vinyl laminate refacing on 20-25 linear feet, same door style, basic hardware - DIY-friendly option using peel-and-stick veneer

Mid-Range

Wood veneer or thermofoil refacing with new doors, soft-close hinges, updated hardware - professional installation on 20-25 linear feet

Premium

Real wood veneer refacing with custom door style, premium hardware, interior refinishing, and addition of crown molding - 20-25 linear feet

Material Options

Material prices below are national averages; availability in Baltimore may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Vinyl Laminate (Budget DIY)	$50-$150/linear ft	Lowest cost, self-install possible with peel-and-stick, wide color range	Less durable than wood, edges can peel over time, limited authentic wood look	Budget refreshes, rental properties, short-term cosmetic updatesLowest cost, self-install possible with peel-and-stick, wide color range
Rigid Thermofoil (RTF)	$100-$250/linear ft installed	Smooth uniform finish, easy to clean, moisture-resistant, many color options	Can peel near heat sources (dishwasher, oven), cannot be repainted	Contemporary and modern kitchens wanting a clean flat or shaker-profile lookSmooth uniform finish, easy to clean, moisture-resistant, many color options
Wood Veneer	$150-$350/linear ft installed	Real wood appearance, can be stained any color, warm authentic look	More expensive than thermofoil, requires finishing/sealing, sensitive to humidity	Traditional and transitional kitchens, homeowners wanting real wood without full replacement costReal wood appearance, can be stained any color, warm authentic look
Solid Wood Doors with Veneer Box	$200-$500/linear ft installed	Solid wood door feel and look, paintable and refinishable, premium result	Most expensive refacing option, approaches the cost of budget replacement	Higher-end refacing projects where appearance is paramountSolid wood door feel and look, paintable and refinishable, premium result
Paint-Grade MDF Doors	$120-$300/linear ft installed	Smooth surface ideal for painted finish, dimensionally stable, various profiles	Heavy, susceptible to edge moisture damage, not refinishable to a stained look	Painted kitchen looks - Shaker, flat-front, and profile styles in white/colorSmooth surface ideal for painted finish, dimensionally stable, various profiles

Other Projects in Baltimore

Full Bathroom Remodel

Basement Waterproofing

Roof Replacement (Asphalt Shingles)

Back to national average for Kitchen Cabinet Refacing

Baltimore Estimate

Typical Range

$4,210-$12,630

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per per linear foot

$105-$526

This 1.05x estimate prices Baltimore labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →