Cost to Kitchen Cabinet Refacing in Atlanta, GA (2026)
If you’re budgeting a kitchen cabinet refacing in Atlanta, most projects run $3,569-$10,706, 11% below the $7,500 national average. What moves that number most is usually one thing: Refacing Material Choice. On its own it can swing the cost by $50 - $350 per linear foot difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Compare refacing vs. replacement honestly. Refacing typically costs 40-60% of full replacement. If your cabinet boxes are in good shape and you just want a new look, refacing is a strong value. If the boxes are sagging or damaged, replace.
In the Southeast (where Atlanta sits): Lower labor costs, competitive cabinet refacer market.
$3,569-$10,706 in Atlanta
11% below the national average · 0.89x cost multiplier
Homeowners in Atlanta typically spend $3,569-$10,706 on a kitchen cabinet refacing, about 11% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Atlanta
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per linear foot | $89 | $223 | $446 |
| Materials | $1,900 | $4,275 | $7,600 |
| Labor | $1,180 | $2,202 | $3,145 |
| Permits | $0 | $0 | $0 |
| Total | $3,080-12% vs. national avg | $6,667-11% vs. national avg | $11,220-10% vs. national avg |
Budget
Vinyl laminate refacing on 20-25 linear feet, same door style, basic hardware - DIY-friendly option using peel-and-stick veneer
Mid-Range
Wood veneer or thermofoil refacing with new doors, soft-close hinges, updated hardware - professional installation on 20-25 linear feet
Premium
Real wood veneer refacing with custom door style, premium hardware, interior refinishing, and addition of crown molding - 20-25 linear feet
Material Options
Material prices below are national averages; availability in Atlanta may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Vinyl Laminate (Budget DIY) | $50-$150/linear ft | Budget refreshes, rental properties, short-term cosmetic updatesLowest cost, self-install possible with peel-and-stick, wide color range |
| Rigid Thermofoil (RTF) | $100-$250/linear ft installed | Contemporary and modern kitchens wanting a clean flat or shaker-profile lookSmooth uniform finish, easy to clean, moisture-resistant, many color options |
| Wood Veneer | $150-$350/linear ft installed | Traditional and transitional kitchens, homeowners wanting real wood without full replacement costReal wood appearance, can be stained any color, warm authentic look |
| Solid Wood Doors with Veneer Box | $200-$500/linear ft installed | Higher-end refacing projects where appearance is paramountSolid wood door feel and look, paintable and refinishable, premium result |
| Paint-Grade MDF Doors | $120-$300/linear ft installed | Painted kitchen looks - Shaker, flat-front, and profile styles in white/colorSmooth surface ideal for painted finish, dimensionally stable, various profiles |
Other Projects in Atlanta
Atlanta Estimate
Typical Range
$3,569-$10,706
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per per linear foot
$89-$446
This 0.89x estimate prices Atlanta labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →