How much does a dishwasher installation cost in Virginia Beach?

A dishwasher installation in Virginia Beach typically costs $98-$311, 11% below the $190 national average.

What is the cost per installation for a dishwasher installation in Virginia Beach?

Dishwasher Installation in Virginia Beach typically costs $67-$533 per installation.

How long does a dishwasher installation take?

A dishwasher installation typically takes 2-4 hours. The minimum timeline is 2 hours, and complex projects can run 1 day.

Can I DIY a dishwasher installation?

DIY feasibility for a dishwasher installation is rated Maybe.

Cost to Dishwasher Installation in Virginia Beach, VA (2026)

If you’re budgeting a dishwasher installation in Virginia Beach, most projects run $98-$311, 11% below the $190 national average. What moves that number most is usually one thing: Replacement vs. First-Time Installation. On its own it can swing the cost by $110 - $600, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Buy the dishwasher from a big-box retailer and add their installation add-on at checkout - Home Depot and Lowes both offer basic installation add-ons for $110-$159 that include haul-away, which is often cheaper than hiring an independent plumber

In the Mid-Atlantic (where Virginia Beach sits): Lower labor rates across the region; Florida coastal markets run slightly higher due to licensed trade minimums.

$98-$311 in Virginia Beach

11% below the national average · 0.89x cost multiplier

Homeowners in Virginia Beach typically spend $98-$311 on a dishwasher installation, about 11% below the national average. Labor rates and contractor availability in the Mid-Atlantic region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Virginia Beach

Line Item	Low	Mid	High
Cost per installation	$67	$169	$533
Materials	$0	$51	$154
Labor	$91	$137	$290
Permits	$0	$0	$77
Total	$91-17% vs. national avg	$188-13% vs. national avg	$521-9% vs. national avg

Budget

Direct swap of an existing dishwasher using existing water supply, drain, and electrical connections. No modifications needed - the installer disconnects the old unit, slides in the new one, and reconnects. Typical of a big-box store or appliance retailer installation add-on.

Mid-Range

Replacement where the supply line or drain hose needs to be rerouted or replaced, or a new braided stainless supply line and angle-stop valve are required. New mounting brackets and junction box cover may also be needed. Most homeowner upgrades fall into this range.

Premium

First-time installation in a kitchen that has never had a built-in dishwasher. Requires running a new hot water supply line, adding a drain connection at the sink drain or garbage disposal, and installing a dedicated 120V/15A or 20A electrical circuit. Permits required in many jurisdictions.

Material Options

Material prices below are national averages; availability in Virginia Beach may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Braided Stainless Supply Line (3/8 in.)	$12-$25 each	Flexible, kink-resistant, rated for 125 PSI - far more durable than the rubber lines that shipped with older dishwashers	Occasionally sold in fixed lengths that don't reach if the shutoff valve is repositioned; measure before buying	Any replacement install; should be replaced any time the old supply line is rubber or shows crackingFlexible, kink-resistant, rated for 125 PSI - far more durable than the rubber lines that shipped with older dishwashers
Angle-Stop Shutoff Valve (3/8 in. compression)	$10-$30 each	Provides a dedicated water shutoff for the dishwasher without turning off the whole kitchen supply; required in most jurisdictions	Older compression-fit valves can leak if not properly tightened; ball valves are more reliable but slightly more expensive	Any installation where no dedicated shutoff exists, or where the existing valve is corroded or a gate-type valveProvides a dedicated water shutoff for the dishwasher without turning off the whole kitchen supply; required in most jurisdictions
Drain Air Gap (countertop or cabinet)	$8-$35 each	Prevents backflow of sewage into the dishwasher if the drain gets clogged; required by plumbing code in California and several other states	Requires drilling a hole in the countertop or sink deck if not already present; some homeowners dislike the countertop fixture appearance	New installations, California kitchens, or any kitchen without an existing high-loop drain configurationPrevents backflow of sewage into the dishwasher if the drain gets clogged; required by plumbing code in California and several other states
Electrical Junction Box and Strain Relief	$8-$20 kit	Provides a safe, code-compliant electrical connection point inside the dishwasher compartment; protects wire connections from moisture	Must be installed by a licensed electrician in most jurisdictions if a new circuit is being added	First-time installations or whenever the existing junction box is absent or shows corrosionProvides a safe, code-compliant electrical connection point inside the dishwasher compartment; protects wire connections from moisture

Other Projects in Virginia Beach

Roof Replacement (Asphalt Shingles)

Vinyl Siding Replacement

Composite Deck Building

Back to national average for Dishwasher Installation

Virginia Beach Estimate

Typical Range

$98-$311

vs. National Average

11% below national

Cost Multiplier

0.89x

Cost Per installation

$67-$533

This 0.89x estimate prices Virginia Beach labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →