Cost to Dishwasher Installation in Indianapolis, IN (2026)
If you’re budgeting a dishwasher installation in Indianapolis, most projects run $109-$347, 1% below the $190 national average. What moves that number most is usually one thing: Replacement vs. First-Time Installation. On its own it can swing the cost by $110 - $600, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Buy the dishwasher from a big-box retailer and add their installation add-on at checkout - Home Depot and Lowes both offer basic installation add-ons for $110-$159 that include haul-away, which is often cheaper than hiring an independent plumber
In the Midwest (where Indianapolis sits): Most Midwest markets run 10-18% below national average; Chicago runs close to the national average.
$109-$347 in Indianapolis
1% below the national average · 0.99x cost multiplier
Homeowners in Indianapolis typically spend $109-$347 on a dishwasher installation, about 1% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Indianapolis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per installation | $74 | $188 | $595 |
| Materials | $0 | $46 | $139 |
| Labor | $112 | $168 | $357 |
| Permits | $0 | $0 | $69 |
| Total | $112+2% vs. national avg | $214+0% vs. national avg | $565-2% vs. national avg |
Budget
Direct swap of an existing dishwasher using existing water supply, drain, and electrical connections. No modifications needed - the installer disconnects the old unit, slides in the new one, and reconnects. Typical of a big-box store or appliance retailer installation add-on.
Mid-Range
Replacement where the supply line or drain hose needs to be rerouted or replaced, or a new braided stainless supply line and angle-stop valve are required. New mounting brackets and junction box cover may also be needed. Most homeowner upgrades fall into this range.
Premium
First-time installation in a kitchen that has never had a built-in dishwasher. Requires running a new hot water supply line, adding a drain connection at the sink drain or garbage disposal, and installing a dedicated 120V/15A or 20A electrical circuit. Permits required in many jurisdictions.
Material Options
Material prices below are national averages; availability in Indianapolis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Braided Stainless Supply Line (3/8 in.) | $12-$25 each | Any replacement install; should be replaced any time the old supply line is rubber or shows crackingFlexible, kink-resistant, rated for 125 PSI - far more durable than the rubber lines that shipped with older dishwashers |
| Angle-Stop Shutoff Valve (3/8 in. compression) | $10-$30 each | Any installation where no dedicated shutoff exists, or where the existing valve is corroded or a gate-type valveProvides a dedicated water shutoff for the dishwasher without turning off the whole kitchen supply; required in most jurisdictions |
| Drain Air Gap (countertop or cabinet) | $8-$35 each | New installations, California kitchens, or any kitchen without an existing high-loop drain configurationPrevents backflow of sewage into the dishwasher if the drain gets clogged; required by plumbing code in California and several other states |
| Electrical Junction Box and Strain Relief | $8-$20 kit | First-time installations or whenever the existing junction box is absent or shows corrosionProvides a safe, code-compliant electrical connection point inside the dishwasher compartment; protects wire connections from moisture |
Other Projects in Indianapolis
Indianapolis Estimate
Typical Range
$109-$347
vs. National Average
1% below national
Cost Multiplier
0.99x
Cost Per installation
$74-$595
This 0.99x estimate prices Indianapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →