Cost to Whole-House Generator Installation in Memphis, TN

$5,740$16,400 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $5,740–$16,400 for a whole-house generator installation in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line ItemLowMidHigh
Cost per unit$2870$9840$16400
Materials$3,280$5,740$12,300
Labor$2,050$3,280$5,740
Permits$656$984$1,640
Total$5,986-18% vs. national avg$10,004-18% vs. national avg$19,680-18% vs. national avg

Budget

10-14 kW air-cooled standby generator, 100-amp transfer switch, existing gas line

Mid-Range

20 kW air-cooled, 200-amp automatic transfer switch, new gas line run

Premium

22+ kW liquid-cooled, whole-house coverage, extended gas line, load management

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

MaterialCost/UnitBest For
10-14 kW Air-Cooled Standby (Generac, Kohler)$4,000 - $8,000 installedHomeowners wanting essential protection without full-house coverage, budgets under $10,000Powers essential loads, most affordable standby option, widely available service
20-22 kW Air-Cooled Standby$8,000 - $15,000 installedMost single-family homes under 3,500 sq ft, best value for near-whole-house coverageHandles most whole-house loads including HVAC, widely available, good balance of cost and coverage
Liquid-Cooled Standby (22+ kW)$15,000 - $35,000 installedLarge homes, all-electric homes, homeowners in frequent-outage areas, commercial applicationsTrue whole-house coverage, quieter than air-cooled, longer lifespan (20,000+ hours), commercial-grade
Portable Generator + Transfer Switch$1,500 - $4,000 installedOccasional outages, budgets under $5,000, renters, vacation propertiesMuch lower cost, portable for other uses, no permanent installation permits in some areas
Propane-Fueled Standby$7,000 - $20,000 installed (plus tank)Rural homes without natural gas service, areas with frequent and prolonged outagesWorks where natural gas is unavailable, cleaner burning than diesel, automatic operation

Other Projects in Memphis

Memphis Estimate

Typical Range

$5,740$16,400

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per unit

$2870–$16400

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →