Cost to Whole-House Fan Installation in Salt Lake City, UT (2026)
If you’re budgeting a whole-house fan installation in Salt Lake City, most projects run $708-$3,035, 1% above the $1,500 national average. What moves that number most is usually one thing: Fan Size (CFM) and House Square Footage. On its own it can swing the cost by $200 - $1,200, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Audit your attic venting before buying the fan - adding soffit or ridge vents ($150-$400 per opening) is a prerequisite and should be in your budget.
In the Mountain West (where Salt Lake City sits): High-altitude homes have ideal conditions - cool nights even in summer, dry air, and mild temperatures. Colorado and Utah have strong utility rebate programs. Elevated installation costs reflect regional labor rates.
$708-$3,035 in Salt Lake City
1% above the national average · 1.01x cost multiplier
Homeowners in Salt Lake City typically spend $708-$3,035 on a whole-house fan installation, about 1% above the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per unit | $405 | $1517 | $3035 |
| Materials | $416 | $832 | $2,080 |
| Labor | $387 | $677 | $1,161 |
| Permits | $0 | $156 | $208 |
| Total | $803+0% vs. national avg | $1,665+1% vs. national avg | $3,449+1% vs. national avg |
Budget
Standard belt-drive whole-house fan, basic ceiling install, existing attic venting
Mid-Range
Insulated two-speed fan, new electrical circuit, damper box, proper attic venting calculation
Premium
Quiet insulated dual-zone fan (Quiet Cool, Broan), smart controls, custom installation
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard Belt-Drive Fan | $400 - $900 installed | Budget-conscious installs, garages, vacation properties, mild climatesLowest upfront cost, widely available, easy to find replacement parts |
| Direct-Drive Fan (Quieter) | $700 - $1,400 installed | Primary residences wanting quiet operation without premium pricingQuieter than belt-drive, less maintenance (no belt to replace), more compact |
| Insulated Whole-House Fan (Quiet Cool, AirScape) | $1,500 - $3,500 installed | Homes where occupants value quiet operation, energy-conscious homeowners, year-round useNear-silent, R-42+ insulated seal when off, multi-speed, energy-efficient |
| Whole-House Ventilator (Energy Recovery Ventilator) | $1,500 - $4,000 installed | Tight, well-insulated homes needing controlled ventilation, not whole-house coolingProvides fresh air year-round, recovers heat/cooling energy, improves indoor air quality |
| Solar-Powered Attic Fan | $600 - $1,500 installed | Supplemental attic cooling, homes that already have adequate ventilationNo operating cost, reduces attic heat buildup, easy installation |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$708-$3,035
vs. National Average
1% above national
Cost Multiplier
1.01x
Cost Per unit
$405-$3035
This 1.01x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →