Cost to Wall Insulation (Blown-In) in Baltimore, MD (2026)
If you’re budgeting a wall insulation (blown-in) in Baltimore, most projects run $1,089-$5,443, 9% above the $2,500 national average. What moves that number most is usually one thing: Wall Area (Square Feet). On its own it can swing the cost by $500 - $4,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: The IRA 30% Energy Efficient Home Improvement Credit covers blown-in wall insulation costs up to $1,200 per year. Combine this with utility rebates to cut your net cost by 40-60%.
In the Northeast (where Baltimore sits): High labor rates and a large stock of pre-1950 homes with empty walls make this a common project. The IRA 30% insulation credit stacks well with New England utility rebates. Older homes in the Northeast often have plaster walls that require more careful patching after drilling.
$1,089-$5,443 in Baltimore
9% above the national average · 1.09x cost multiplier
Expect to pay $1,089-$5,443 for a wall insulation (blown-in) in Baltimore, about 9% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Baltimore prices.
Cost Breakdown in Baltimore
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $1 | $2 | $4 |
| Materials | $436 | $981 | $2,180 |
| Labor | $870 | $1,958 | $3,807 |
| Permits | $0 | $0 | $218 |
| Total | $1,306+9% vs. national avg | $2,939+9% vs. national avg | $6,205+9% vs. national avg |
Budget
Blown-in cellulose, 1,000 sq ft of exterior wall, drill-and-fill method, patch holes
Mid-Range
Dense-pack cellulose or fiberglass, 2,000 sq ft, existing home retrofit with patching
Premium
Spray foam or high-performance dense-pack, full exterior envelope, older home
Material Options
Material prices below are national averages; availability in Baltimore may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Blown-In Cellulose (Standard) | $1.00 - $2.00 per sq ft installed | Most retrofits - the default choice for drill-and-fill wall insulationRecycled content, excellent air-sealing properties, R-3.5/inch, fire-treated, widely available |
| Blown-In Fiberglass (Standard) | $1.00 - $2.00 per sq ft installed | Humid climates where moisture management is a concernDoes not settle, moisture-resistant, R-2.2-2.7/inch, lighter than cellulose |
| Dense-Pack Cellulose | $1.50 - $2.50 per sq ft installed | Exterior walls where settling would reduce performance, high-performance retrofitsHigher density (3.5 lbs/cubic ft) virtually eliminates settling, better air sealing than standard blown-in |
| Open-Cell Spray Foam (R-3.7/inch) | $2.00 - $3.50 per sq ft installed | New construction or gut renovations where walls are already openExcellent air sealing, fills irregular cavities completely, soft and flexible |
| Closed-Cell Spray Foam (R-6.5/inch) | $3.00 - $5.00 per sq ft installed | New construction, below-grade walls, extremely cold climates needing maximum R-valueHighest R-value per inch, acts as vapor barrier, rigid structural improvement |
Other Projects in Baltimore
Baltimore Estimate
Typical Range
$1,089-$5,443
vs. National Average
9% above national
Cost Multiplier
1.09x
Cost Per sq ft
$1-$4
This 1.09x estimate prices Baltimore labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →