Cost to Attic Insulation in Memphis, TN

$820$2,870 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $820–$2,870 for a attic insulation in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line ItemLowMidHigh
Cost per sq ft$1$1$3
Materials$492$820$1,476
Labor$287$574$820
Permits$0$41$82
Design$41$205$492
Total$820-18% vs. national avg$1,640-18% vs. national avg$2,870-18% vs. national avg

Budget

Blown-in fiberglass over existing insulation (top-up to R-38), 1,000 sq ft attic, basic air sealing

Mid-Range

Blown-in cellulose to R-49, 1,200 sq ft attic, comprehensive air sealing of gaps, can lights, and penetrations

Premium

Spray foam on attic roof deck (creating conditioned attic), R-38 to R-49, 1,200 sq ft, full air sealing, with baffles and ventilation work

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

MaterialCost/UnitBest For
Blown-In Fiberglass$0.60 - $1.20 per sq ftBudget topping-off over existing insulation, DIY-friendly with rental blowerCheapest option, non-combustible, does not absorb moisture, pest-resistant
Blown-In Cellulose$0.80 - $1.50 per sq ftMost attic insulation projects - best balance of cost, performance, and air sealingGood R-value per inch (R-3.5), fills gaps better than fiberglass, made from recycled paper
Fiberglass Batts$0.70 - $1.50 per sq ftOpen attic floors with consistent joist spacing and no obstructionsWidely available, familiar to installers, good for standard joist spacing
Open-Cell Spray Foam$1.50 - $2.50 per sq ftAttic roof deck application in mild climates, soundproofing between floorsExcellent air sealing, fills irregular spaces, good soundproofing
Closed-Cell Spray Foam$2.50 - $5.00 per sq ftAttic roof deck in cold/wet climates, creating a conditioned attic for HVAC equipmentHighest R-value per inch (R-6.5), air and moisture barrier, adds structural rigidity

Other Projects in Memphis

Memphis Estimate

Typical Range

$820$2,870

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per sq ft

$1–$3

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →