Cost to Tile Grout Repair in Raleigh, NC

$270–$1,080 in Raleigh

10% below the national average · 0.90x cost multiplier

Homeowners in Raleigh typically spend $270–$1,080 on a tile grout repair, about 10% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Raleigh

Line Item	Low	Mid	High
Cost per	$NaN	$NaN	$NaN
Materials	$45	$135	$360
Labor	$135	$450	$990
Permits	$0	$0	$0
Total	$180-10% vs. national avg	$585-10% vs. national avg	$1,350-10% vs. national avg

Budget

Cleaning and recoloring existing grout lines in a small bathroom floor or shower (20-30 sq ft). Uses grout pen or colorant rather than full regrout. Good for cosmetic issues with structurally sound grout.

Mid-Range

Removing and replacing grout in an average bathroom floor or shower (60-100 sq ft). Includes grout removal, new grout application, and sealing. The most common repair scenario.

Premium

Full regrout of large tile area (150-250 sq ft) using epoxy grout, including removal of all old grout, addressing cracked or loose tiles, new epoxy application, and sealing. Large showers, full bathrooms, or kitchen tile floors.

Material Options

Material prices below are national averages; availability in Raleigh may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Sanded Cement Grout	$15-$30/bag	Most common, wide color selection, easy to apply, inexpensive	Porous - requires sealing, can stain, may crack over time with movement, needs periodic resealing	Floor tiles with joints wider than 1/8 inch, most standard tile applicationsMost common, wide color selection, easy to apply, inexpensive
Unsanded Cement Grout	$15-$28/bag	Smooth finish for narrow joints, won't scratch polished tile, standard option for walls	Same porosity issues as sanded, requires sealing, joint width limited to 1/8 inch or less	Wall tiles, glass tile, marble, and any application with narrow grout jointsSmooth finish for narrow joints, won't scratch polished tile, standard option for walls
Epoxy Grout	$60-$120/bag	Extremely stain-resistant, never needs sealing, doesn't crack, 25+ year lifespan, chemical resistant	3-4x the cost of cement grout, harder to apply (fast setup time), harder to clean off tile faces	Showers, kitchen backsplashes, commercial kitchens, anywhere staining is a major concernExtremely stain-resistant, never needs sealing, doesn't crack, 25+ year lifespan, chemical resistant
Grout Colorant / Sealer	$20-$40/bottle	Refreshes grout color without removal, very low cost, fast application	Cosmetic fix only, won't repair cracked or failing grout, requires clean and sound existing grout	Grout that is structurally intact but discolored, stained, or fadedRefreshes grout color without removal, very low cost, fast application
Pre-Mixed Grout	$20-$40/quart	Easy to use, no mixing, good for small repairs and touch-ups	More expensive per sq ft, color consistency varies, shorter shelf life	DIY small repairs on floor or wall tile with a few cracked or missing grout jointsEasy to use, no mixing, good for small repairs and touch-ups

Other Projects in Raleigh

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Tile Grout Repair

Raleigh Estimate

Typical Range

$270–$1,080

vs. National Average

10% below national

Cost Multiplier

0.90x

Cost Per

$NaN–$NaN

Estimates apply Raleigh's 0.90x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →