Cost to Tile Grout Repair in Phoenix, AZ

$285–$1,140 in Phoenix

5% below the national average · 0.95x cost multiplier

In Phoenix, a tile grout repair runs $285 to $1,140 on average — about 5% below what homeowners pay nationwide. The Mountain West market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Phoenix

Line Item	Low	Mid	High
Cost per	$NaN	$NaN	$NaN
Materials	$48	$143	$380
Labor	$143	$475	$1,045
Permits	$0	$0	$0
Total	$190-5% vs. national avg	$618-5% vs. national avg	$1,425-5% vs. national avg

Budget

Cleaning and recoloring existing grout lines in a small bathroom floor or shower (20-30 sq ft). Uses grout pen or colorant rather than full regrout. Good for cosmetic issues with structurally sound grout.

Mid-Range

Removing and replacing grout in an average bathroom floor or shower (60-100 sq ft). Includes grout removal, new grout application, and sealing. The most common repair scenario.

Premium

Full regrout of large tile area (150-250 sq ft) using epoxy grout, including removal of all old grout, addressing cracked or loose tiles, new epoxy application, and sealing. Large showers, full bathrooms, or kitchen tile floors.

Material Options

Material prices below are national averages; availability in Phoenix may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Sanded Cement Grout	$15-$30/bag	Most common, wide color selection, easy to apply, inexpensive	Porous - requires sealing, can stain, may crack over time with movement, needs periodic resealing	Floor tiles with joints wider than 1/8 inch, most standard tile applicationsMost common, wide color selection, easy to apply, inexpensive
Unsanded Cement Grout	$15-$28/bag	Smooth finish for narrow joints, won't scratch polished tile, standard option for walls	Same porosity issues as sanded, requires sealing, joint width limited to 1/8 inch or less	Wall tiles, glass tile, marble, and any application with narrow grout jointsSmooth finish for narrow joints, won't scratch polished tile, standard option for walls
Epoxy Grout	$60-$120/bag	Extremely stain-resistant, never needs sealing, doesn't crack, 25+ year lifespan, chemical resistant	3-4x the cost of cement grout, harder to apply (fast setup time), harder to clean off tile faces	Showers, kitchen backsplashes, commercial kitchens, anywhere staining is a major concernExtremely stain-resistant, never needs sealing, doesn't crack, 25+ year lifespan, chemical resistant
Grout Colorant / Sealer	$20-$40/bottle	Refreshes grout color without removal, very low cost, fast application	Cosmetic fix only, won't repair cracked or failing grout, requires clean and sound existing grout	Grout that is structurally intact but discolored, stained, or fadedRefreshes grout color without removal, very low cost, fast application
Pre-Mixed Grout	$20-$40/quart	Easy to use, no mixing, good for small repairs and touch-ups	More expensive per sq ft, color consistency varies, shorter shelf life	DIY small repairs on floor or wall tile with a few cracked or missing grout jointsEasy to use, no mixing, good for small repairs and touch-ups

Other Projects in Phoenix

Full Kitchen Remodel

Full Bathroom Remodel

Central AC Installation

Back to national average for Tile Grout Repair

Phoenix Estimate

Typical Range

$285–$1,140

vs. National Average

5% below national

Cost Multiplier

0.95x

Cost Per

$NaN–$NaN

Estimates apply Phoenix's 0.95x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →