Cost to Tile Flooring Installation in Raleigh, NC (2026)
If you’re budgeting a tile flooring installation in Raleigh, most projects run $800-$4,000, 11% below the $2,200 national average. What moves that number most is usually one thing: Tile Material Choice. On its own it can swing the cost by $1 - $25 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Buy 10-15% extra tile to account for cuts, breakage, and future repairs - but buy all tile from the same dye lot to avoid color variation on replacements.
In the Southeast (where Raleigh sits): Florida, Georgia, and the Carolinas offer lower labor rates. Coastal Florida markets are closer to average due to demand.
$800-$4,000 in Raleigh
11% below the national average · 0.89x cost multiplier
Homeowners in Raleigh typically spend $800-$4,000 on a tile flooring installation, about 11% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Raleigh
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $5 | $12 | $27 |
| Materials | $428 | $1,045 | $2,660 |
| Labor | $282 | $706 | $1,098 |
| Permits | $0 | $0 | $0 |
| Total | $710-12% vs. national avg | $1,751-12% vs. national avg | $3,948-10% vs. national avg |
Budget
Ceramic tile at $1-$3/sq ft, basic installation on a prepped surface in a single small bathroom or entryway (roughly 60 sq ft).
Mid-Range
Porcelain tile at $4-$8/sq ft, standard installation with cement board underlayment in a 150 sq ft kitchen or bathroom.
Premium
Large-format or natural stone tile at $10-$25/sq ft, complex pattern (herringbone, diagonal), custom grout work in a 150-200 sq ft space.
Material Options
Material prices below are national averages; availability in Raleigh may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $1-$5/sq ft | Bathroom walls, low-traffic floors, budget remodelsLowest cost, wide color and style selection, DIY-friendly, easy to cut |
| Porcelain Tile | $3-$10/sq ft | Kitchen floors, bathrooms, high-traffic entryways, outdoor useDenser and harder than ceramic, nearly impervious to moisture, excellent durability, available in large formats |
| Natural Stone (Travertine) | $5-$15/sq ft | Bathrooms, entryways, Mediterranean and traditional aestheticsUnique natural look, each tile different, good resale appeal, can be refinished |
| Marble Tile | $10-$25/sq ft | Master bathrooms, formal entryways, backsplashesTimeless luxury look, increases home value, cool underfoot, polishes beautifully |
| Slate Tile | $4-$12/sq ft | Entryways, mudrooms, outdoor covered areasExcellent slip resistance, natural texture, durable, low maintenance |
| Mosaic Tile | $7-$20/sq ft | Shower floors, backsplashes, decorative accentsUnlimited design options, great for accent walls and shower floors, good slip resistance on small tiles |
Other Projects in Raleigh
Raleigh Estimate
Typical Range
$800-$4,000
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per sq ft
$5-$27
This 0.89x estimate prices Raleigh labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →