Cost to Tile Flooring Installation in Jacksonville, FL (2026)
If you’re budgeting a tile flooring installation in Jacksonville, most projects run $812-$4,059, 10% below the $2,200 national average. What moves that number most is usually one thing: Tile Material Choice. On its own it can swing the cost by $1 - $25 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Buy 10-15% extra tile to account for cuts, breakage, and future repairs - but buy all tile from the same dye lot to avoid color variation on replacements.
In the Southeast (where Jacksonville sits): Florida, Georgia, and the Carolinas offer lower labor rates. Coastal Florida markets are closer to average due to demand.
$812-$4,059 in Jacksonville
10% below the national average · 0.90x cost multiplier
In Jacksonville, a tile flooring installation runs $812 to $4,059 on average - about 10% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Jacksonville
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $5 | $13 | $27 |
| Materials | $430 | $1,051 | $2,674 |
| Labor | $292 | $730 | $1,136 |
| Permits | $0 | $0 | $0 |
| Total | $722-11% vs. national avg | $1,781-11% vs. national avg | $4,001-9% vs. national avg |
Budget
Ceramic tile at $1-$3/sq ft, basic installation on a prepped surface in a single small bathroom or entryway (roughly 60 sq ft).
Mid-Range
Porcelain tile at $4-$8/sq ft, standard installation with cement board underlayment in a 150 sq ft kitchen or bathroom.
Premium
Large-format or natural stone tile at $10-$25/sq ft, complex pattern (herringbone, diagonal), custom grout work in a 150-200 sq ft space.
Material Options
Material prices below are national averages; availability in Jacksonville may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $1-$5/sq ft | Bathroom walls, low-traffic floors, budget remodelsLowest cost, wide color and style selection, DIY-friendly, easy to cut |
| Porcelain Tile | $3-$10/sq ft | Kitchen floors, bathrooms, high-traffic entryways, outdoor useDenser and harder than ceramic, nearly impervious to moisture, excellent durability, available in large formats |
| Natural Stone (Travertine) | $5-$15/sq ft | Bathrooms, entryways, Mediterranean and traditional aestheticsUnique natural look, each tile different, good resale appeal, can be refinished |
| Marble Tile | $10-$25/sq ft | Master bathrooms, formal entryways, backsplashesTimeless luxury look, increases home value, cool underfoot, polishes beautifully |
| Slate Tile | $4-$12/sq ft | Entryways, mudrooms, outdoor covered areasExcellent slip resistance, natural texture, durable, low maintenance |
| Mosaic Tile | $7-$20/sq ft | Shower floors, backsplashes, decorative accentsUnlimited design options, great for accent walls and shower floors, good slip resistance on small tiles |
Other Projects in Jacksonville
Jacksonville Estimate
Typical Range
$812-$4,059
vs. National Average
10% below national
Cost Multiplier
0.90x
Cost Per sq ft
$5-$27
This 0.90x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →