Cost to Tile Flooring Installation in Cleveland, OH

$774–$3,870 in Cleveland

14% below the national average · 0.86x cost multiplier

Homeowners in Cleveland typically spend $774–$3,870 on a tile flooring installation, about 14% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Cleveland

Line Item	Low	Mid	High
Cost per sq ft	$5	$12	$26
Materials	$387	$946	$2,408
Labor	$310	$774	$1,204
Permits	$0	$0	$0
Total	$697-14% vs. national avg	$1,720-14% vs. national avg	$3,784-14% vs. national avg

Budget

Ceramic tile at $1-$3/sq ft, basic installation on a prepped surface in a single small bathroom or entryway (roughly 60 sq ft).

Mid-Range

Porcelain tile at $4-$8/sq ft, standard installation with cement board underlayment in a 150 sq ft kitchen or bathroom.

Premium

Large-format or natural stone tile at $10-$25/sq ft, complex pattern (herringbone, diagonal), custom grout work in a 150-200 sq ft space.

Material Options

Material prices below are national averages; availability in Cleveland may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$1-$5/sq ft	Lowest cost, wide color and style selection, DIY-friendly, easy to cut	More porous than porcelain, less durable under heavy traffic, absorbs stains if unsealed	Bathroom walls, low-traffic floors, budget remodelsLowest cost, wide color and style selection, DIY-friendly, easy to cut
Porcelain Tile	$3-$10/sq ft	Denser and harder than ceramic, nearly impervious to moisture, excellent durability, available in large formats	Heavier and harder to cut, requires diamond blade, more expensive than ceramic	Kitchen floors, bathrooms, high-traffic entryways, outdoor useDenser and harder than ceramic, nearly impervious to moisture, excellent durability, available in large formats
Natural Stone (Travertine)	$5-$15/sq ft	Unique natural look, each tile different, good resale appeal, can be refinished	Requires sealing, porous, can stain, more maintenance than porcelain, higher install cost	Bathrooms, entryways, Mediterranean and traditional aestheticsUnique natural look, each tile different, good resale appeal, can be refinished
Marble Tile	$10-$25/sq ft	Timeless luxury look, increases home value, cool underfoot, polishes beautifully	Very porous, stains and etches easily, requires frequent sealing, expensive, slippery when wet	Master bathrooms, formal entryways, backsplashesTimeless luxury look, increases home value, cool underfoot, polishes beautifully
Slate Tile	$4-$12/sq ft	Excellent slip resistance, natural texture, durable, low maintenance	Uneven surface can be hard to clean, limited color palette, heavy	Entryways, mudrooms, outdoor covered areasExcellent slip resistance, natural texture, durable, low maintenance
Mosaic Tile	$7-$20/sq ft	Unlimited design options, great for accent walls and shower floors, good slip resistance on small tiles	High labor cost due to quantity of grout lines, grout maintenance, fragile individual tiles	Shower floors, backsplashes, decorative accentsUnlimited design options, great for accent walls and shower floors, good slip resistance on small tiles

Other Projects in Cleveland

Full Kitchen Remodel

Basement Finishing

Roof Replacement (Asphalt Shingles)

Back to national average for Tile Flooring Installation

Cleveland Estimate

Typical Range

$774–$3,870

vs. National Average

14% below national

Cost Multiplier

0.86x

Cost Per sq ft

$5–$26

Estimates apply Cleveland's 0.86x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →