Cost to Tile Floor Installation in Minneapolis, MN (2026)
If you’re budgeting a tile floor installation in Minneapolis, most projects run $968-$4,838, 8% above the $2,200 national average. What moves that number most is usually one thing: Tile Material Type. On its own it can swing the cost by $1 - $25 per sq ft (materials), so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose porcelain over natural stone - you get a similar look for $5-$15 less per sq ft, and porcelain requires no annual sealing
In the Midwest (where Minneapolis sits): Most Midwest markets run 10-18% below national average for tile labor.
$968-$4,838 in Minneapolis
8% above the national average · 1.08x cost multiplier
In Minneapolis, a tile floor installation runs $968 to $4,838 on average - about 8% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Minneapolis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $11 | $38 |
| Materials | $410 | $1,128 | $3,075 |
| Labor | $568 | $1,250 | $2,841 |
| Permits | $0 | $0 | $0 |
| Total | $978+9% vs. national avg | $2,378+8% vs. national avg | $6,429+7% vs. national avg |
Budget
100 sq ft of basic ceramic tile in a small bathroom, simple grid pattern, existing substrate in good condition.
Mid-Range
200 sq ft of porcelain tile in kitchen or main bathroom, diagonal or offset pattern, backer board installation included.
Premium
400+ sq ft of large-format or natural stone tile, custom pattern (herringbone/mosaic), heated floor system, full substrate prep.
Material Options
Material prices below are national averages; availability in Minneapolis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $1-$5 per sq ft | Budget bathroom floors, laundry rooms, mudrooms, low-traffic areasMost affordable option, wide range of colors and styles, easy to cut and work with, good for walls and floors |
| Porcelain Tile | $3-$10 per sq ft | Kitchens, main bathrooms, entryways, any high-traffic or high-moisture floorDenser and harder than ceramic, excellent water and stain resistance, suitable for outdoor use, very durable |
| Natural Stone (Marble, Slate, Travertine) | $5-$25 per sq ft | Master bathrooms, entryways, upscale kitchen applicationsUnique veining and natural variation, premium aesthetic, can increase home value |
| Glass Tile | $7-$30 per sq ft | Accent borders, shower walls, bathroom floor borders; not recommended as primary large-area floor tileReflective quality brightens spaces, non-porous and easy to clean, resists stains and mold |
| Large-Format Tile (18x18 to 24x48+) | $4-$15 per sq ft | Open-plan kitchens, living areas, modern bathrooms with good subfloor conditionFewer grout lines create a seamless look, modern aesthetic, easier to keep clean |
Other Projects in Minneapolis
Minneapolis Estimate
Typical Range
$968-$4,838
vs. National Average
8% above national
Cost Multiplier
1.08x
Cost Per sq ft
$3-$38
This 1.08x estimate prices Minneapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →