Cost to Tile Floor Installation in Memphis, TN (2026)
If you’re budgeting a tile floor installation in Memphis, most projects run $780-$3,899, 13% below the $2,200 national average. What moves that number most is usually one thing: Tile Material Type. On its own it can swing the cost by $1 - $25 per sq ft (materials), so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose porcelain over natural stone - you get a similar look for $5-$15 less per sq ft, and porcelain requires no annual sealing
In the Southeast (where Memphis sits): Lower labor costs across the region; Florida coastal markets slightly higher than inland.
$780-$3,899 in Memphis
13% below the national average · 0.87x cost multiplier
Expect to pay $780-$3,899 for a tile floor installation in Memphis, about 13% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.
Cost Breakdown in Memphis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $9 | $30 |
| Materials | $364 | $1,001 | $2,730 |
| Labor | $407 | $895 | $2,033 |
| Permits | $0 | $0 | $0 |
| Total | $771-14% vs. national avg | $1,896-14% vs. national avg | $5,218-13% vs. national avg |
Budget
100 sq ft of basic ceramic tile in a small bathroom, simple grid pattern, existing substrate in good condition.
Mid-Range
200 sq ft of porcelain tile in kitchen or main bathroom, diagonal or offset pattern, backer board installation included.
Premium
400+ sq ft of large-format or natural stone tile, custom pattern (herringbone/mosaic), heated floor system, full substrate prep.
Material Options
Material prices below are national averages; availability in Memphis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $1-$5 per sq ft | Budget bathroom floors, laundry rooms, mudrooms, low-traffic areasMost affordable option, wide range of colors and styles, easy to cut and work with, good for walls and floors |
| Porcelain Tile | $3-$10 per sq ft | Kitchens, main bathrooms, entryways, any high-traffic or high-moisture floorDenser and harder than ceramic, excellent water and stain resistance, suitable for outdoor use, very durable |
| Natural Stone (Marble, Slate, Travertine) | $5-$25 per sq ft | Master bathrooms, entryways, upscale kitchen applicationsUnique veining and natural variation, premium aesthetic, can increase home value |
| Glass Tile | $7-$30 per sq ft | Accent borders, shower walls, bathroom floor borders; not recommended as primary large-area floor tileReflective quality brightens spaces, non-porous and easy to clean, resists stains and mold |
| Large-Format Tile (18x18 to 24x48+) | $4-$15 per sq ft | Open-plan kitchens, living areas, modern bathrooms with good subfloor conditionFewer grout lines create a seamless look, modern aesthetic, easier to keep clean |
Other Projects in Memphis
Memphis Estimate
Typical Range
$780-$3,899
vs. National Average
13% below national
Cost Multiplier
0.87x
Cost Per sq ft
$3-$30
This 0.87x estimate prices Memphis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →