Cost to Tile Floor Installation in Jacksonville, FL (2026)
If you’re budgeting a tile floor installation in Jacksonville, most projects run $801-$4,006, 11% below the $2,200 national average. What moves that number most is usually one thing: Tile Material Type. On its own it can swing the cost by $1 - $25 per sq ft (materials), so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose porcelain over natural stone - you get a similar look for $5-$15 less per sq ft, and porcelain requires no annual sealing
In the Southeast (where Jacksonville sits): Lower labor costs across the region; Florida coastal markets slightly higher than inland.
$801-$4,006 in Jacksonville
11% below the national average · 0.89x cost multiplier
In Jacksonville, a tile floor installation runs $801 to $4,006 on average - about 11% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Jacksonville
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $9 | $31 |
| Materials | $382 | $1,051 | $2,865 |
| Labor | $406 | $892 | $2,028 |
| Permits | $0 | $0 | $0 |
| Total | $788-12% vs. national avg | $1,943-12% vs. national avg | $5,371-10% vs. national avg |
Budget
100 sq ft of basic ceramic tile in a small bathroom, simple grid pattern, existing substrate in good condition.
Mid-Range
200 sq ft of porcelain tile in kitchen or main bathroom, diagonal or offset pattern, backer board installation included.
Premium
400+ sq ft of large-format or natural stone tile, custom pattern (herringbone/mosaic), heated floor system, full substrate prep.
Material Options
Material prices below are national averages; availability in Jacksonville may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Ceramic Tile | $1-$5 per sq ft | Budget bathroom floors, laundry rooms, mudrooms, low-traffic areasMost affordable option, wide range of colors and styles, easy to cut and work with, good for walls and floors |
| Porcelain Tile | $3-$10 per sq ft | Kitchens, main bathrooms, entryways, any high-traffic or high-moisture floorDenser and harder than ceramic, excellent water and stain resistance, suitable for outdoor use, very durable |
| Natural Stone (Marble, Slate, Travertine) | $5-$25 per sq ft | Master bathrooms, entryways, upscale kitchen applicationsUnique veining and natural variation, premium aesthetic, can increase home value |
| Glass Tile | $7-$30 per sq ft | Accent borders, shower walls, bathroom floor borders; not recommended as primary large-area floor tileReflective quality brightens spaces, non-porous and easy to clean, resists stains and mold |
| Large-Format Tile (18x18 to 24x48+) | $4-$15 per sq ft | Open-plan kitchens, living areas, modern bathrooms with good subfloor conditionFewer grout lines create a seamless look, modern aesthetic, easier to keep clean |
Other Projects in Jacksonville
Jacksonville Estimate
Typical Range
$801-$4,006
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per sq ft
$3-$31
This 0.89x estimate prices Jacksonville labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →