Cost to Tile Floor Installation in Cleveland, OH

$774–$3,870 in Cleveland

14% below the national average · 0.86x cost multiplier

Homeowners in Cleveland typically spend $774–$3,870 on a tile floor installation, about 14% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Cleveland

Line Item	Low	Mid	High
Cost per sq ft	$3	$9	$30
Materials	$344	$946	$2,580
Labor	$430	$946	$2,150
Permits	$0	$0	$0
Total	$774-14% vs. national avg	$1,892-14% vs. national avg	$5,160-14% vs. national avg

Budget

100 sq ft of basic ceramic tile in a small bathroom, simple grid pattern, existing substrate in good condition.

Mid-Range

200 sq ft of porcelain tile in kitchen or main bathroom, diagonal or offset pattern, backer board installation included.

Premium

400+ sq ft of large-format or natural stone tile, custom pattern (herringbone/mosaic), heated floor system, full substrate prep.

Material Options

Material prices below are national averages; availability in Cleveland may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$1-$5 per sq ft	Most affordable option, wide range of colors and styles, easy to cut and work with, good for walls and floors	More porous than porcelain, can chip at edges, not ideal for high-moisture or freeze-thaw environments	Budget bathroom floors, laundry rooms, mudrooms, low-traffic areasMost affordable option, wide range of colors and styles, easy to cut and work with, good for walls and floors
Porcelain Tile	$3-$10 per sq ft	Denser and harder than ceramic, excellent water and stain resistance, suitable for outdoor use, very durable	Harder to cut (requires wet saw with diamond blade), heavier, slightly more expensive than ceramic	Kitchens, main bathrooms, entryways, any high-traffic or high-moisture floorDenser and harder than ceramic, excellent water and stain resistance, suitable for outdoor use, very durable
Natural Stone (Marble, Slate, Travertine)	$5-$25 per sq ft	Unique veining and natural variation, premium aesthetic, can increase home value	Requires sealing annually, porous and prone to staining if unsealed, heavy and difficult to install, cold underfoot	Master bathrooms, entryways, upscale kitchen applicationsUnique veining and natural variation, premium aesthetic, can increase home value
Glass Tile	$7-$30 per sq ft	Reflective quality brightens spaces, non-porous and easy to clean, resists stains and mold	Slippery when wet (not ideal for floors), difficult to cut without chipping, expensive, requires white thinset to avoid color distortion	Accent borders, shower walls, bathroom floor borders; not recommended as primary large-area floor tileReflective quality brightens spaces, non-porous and easy to clean, resists stains and mold
Large-Format Tile (18x18 to 24x48+)	$4-$15 per sq ft	Fewer grout lines create a seamless look, modern aesthetic, easier to keep clean	Requires very flat subfloor (lippage is more visible), heavy and harder to handle, more cuts wasted, added labor cost	Open-plan kitchens, living areas, modern bathrooms with good subfloor conditionFewer grout lines create a seamless look, modern aesthetic, easier to keep clean

Other Projects in Cleveland

Full Kitchen Remodel

Basement Finishing

Roof Replacement (Asphalt Shingles)

Back to national average for Tile Floor Installation

Cleveland Estimate

Typical Range

$774–$3,870

vs. National Average

14% below national

Cost Multiplier

0.86x

Cost Per sq ft

$3–$30

Estimates apply Cleveland's 0.86x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →