Cost to Subfloor Repair & Replacement in San Antonio, TX (2026)
If you’re budgeting a subfloor repair & replacement in San Antonio, most projects run $827-$4,136, 17% below the $2,500 national average. What moves that number most is usually one thing: Size of Damaged Area. On its own it can swing the cost by $3 - $10 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Remove the existing floor covering yourself to save $1-$4/sq ft ($200-$800 on a typical room)
In the Southeast (where San Antonio sits): Lower labor costs, more moisture-related damage common.
$827-$4,136 in San Antonio
17% below the national average · 0.83x cost multiplier
Expect to pay $827-$4,136 for a subfloor repair & replacement in San Antonio, about 17% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Antonio prices.
Cost Breakdown in San Antonio
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $2 | $5 | $8 |
| Materials | $236 | $756 | $1,890 |
| Labor | $302 | $1,131 | $2,639 |
| Permits | $0 | $95 | $189 |
| Total | $538-17% vs. national avg | $1,982-17% vs. national avg | $4,718-17% vs. national avg |
Budget
Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.
Mid-Range
Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.
Premium
Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.
Material Options
Material prices below are national averages; availability in San Antonio may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| CDX Plywood (3/4-inch) | $1.00-$1.50/sq ft | Standard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types |
| OSB (Oriented Strand Board, 23/32-inch) | $0.80-$1.25/sq ft | Budget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available |
| AdvanTech/Engineered Subfloor | $2.00-$3.00/sq ft | Bathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty |
| Tongue-and-Groove Plywood (3/4-inch) | $1.25-$2.00/sq ft | Open living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface |
Other Projects in San Antonio
San Antonio Estimate
Typical Range
$827-$4,136
vs. National Average
17% below national
Cost Multiplier
0.83x
Cost Per sq ft
$2-$8
This 0.83x estimate prices San Antonio labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →