Cost to Subfloor Repair & Replacement in Jacksonville, FL

$910$4,550 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a subfloor repair & replacement runs $910 to $4,550 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line ItemLowMidHigh
Cost per sq ft$3$5$9
Materials$228$728$1,820
Labor$364$1,365$3,185
Permits$0$91$182
Total$592-9% vs. national avg$2,184-9% vs. national avg$5,187-9% vs. national avg

Budget

Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.

Mid-Range

Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.

Premium

Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

MaterialCost/UnitBest For
CDX Plywood (3/4-inch)$1.00-$1.50/sq ftStandard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types
OSB (Oriented Strand Board, 23/32-inch)$0.80-$1.25/sq ftBudget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available
AdvanTech/Engineered Subfloor$2.00-$3.00/sq ftBathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty
Tongue-and-Groove Plywood (3/4-inch)$1.25-$2.00/sq ftOpen living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface

Other Projects in Jacksonville

Jacksonville Estimate

Typical Range

$910$4,550

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per sq ft

$3–$9

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →