Cost to Subfloor Repair & Replacement in Houston, TX (2026)
If you’re budgeting a subfloor repair & replacement in Houston, most projects run $866-$4,330, 13% below the $2,500 national average. What moves that number most is usually one thing: Size of Damaged Area. On its own it can swing the cost by $3 - $10 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Remove the existing floor covering yourself to save $1-$4/sq ft ($200-$800 on a typical room)
In the South (where Houston sits): Lower labor costs, more moisture-related damage common.
$866-$4,330 in Houston
13% below the national average · 0.87x cost multiplier
In Houston, a subfloor repair & replacement runs $866 to $4,330 on average - about 13% below what homeowners pay nationwide. The South market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Houston
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $5 | $9 |
| Materials | $240 | $768 | $1,920 |
| Labor | $323 | $1,211 | $2,827 |
| Permits | $0 | $96 | $192 |
| Total | $563-13% vs. national avg | $2,075-14% vs. national avg | $4,939-13% vs. national avg |
Budget
Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.
Mid-Range
Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.
Premium
Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.
Material Options
Material prices below are national averages; availability in Houston may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| CDX Plywood (3/4-inch) | $1.00-$1.50/sq ft | Standard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types |
| OSB (Oriented Strand Board, 23/32-inch) | $0.80-$1.25/sq ft | Budget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available |
| AdvanTech/Engineered Subfloor | $2.00-$3.00/sq ft | Bathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty |
| Tongue-and-Groove Plywood (3/4-inch) | $1.25-$2.00/sq ft | Open living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface |
Other Projects in Houston
Houston Estimate
Typical Range
$866-$4,330
vs. National Average
13% below national
Cost Multiplier
0.87x
Cost Per sq ft
$3-$9
This 0.87x estimate prices Houston labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →