How much does a subfloor repair & replacement cost in Denver?

A subfloor repair & replacement in Denver typically costs $1,047-$5,233, 5% above the $2,500 national average.

What is the cost per sq ft for a subfloor repair & replacement in Denver?

Subfloor Repair & Replacement in Denver typically costs $3-$10 per sq ft.

How long does a subfloor repair & replacement take?

A subfloor repair & replacement typically takes 1-3 days. The minimum timeline is 4 hours, and complex projects can run 2 weeks.

Can I DIY a subfloor repair & replacement?

DIY feasibility for a subfloor repair & replacement is rated Moderate.

Cost to Subfloor Repair & Replacement in Denver, CO (2026)

If you’re budgeting a subfloor repair & replacement in Denver, most projects run $1,047-$5,233, 5% above the $2,500 national average. What moves that number most is usually one thing: Size of Damaged Area. On its own it can swing the cost by $3 - $10 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Remove the existing floor covering yourself to save $1-$4/sq ft ($200-$800 on a typical room)

In the Mountain West (where Denver sits): Moderate costs.

$1,047-$5,233 in Denver

5% above the national average · 1.05x cost multiplier

Expect to pay $1,047-$5,233 for a subfloor repair & replacement in Denver, about 5% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per sq ft	$3	$6	$10
Materials	$265	$848	$2,120
Labor	$415	$1,558	$3,634
Permits	$0	$106	$212
Total	$680+5% vs. national avg	$2,512+5% vs. national avg	$5,966+5% vs. national avg

Budget

Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.

Mid-Range

Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.

Premium

Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
CDX Plywood (3/4-inch)	$1.00-$1.50/sq ft	Industry standard, strong, widely available, accepts all flooring types	Swells when wet, can delaminate if exposed to moisture, heavier than OSB	Standard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types
OSB (Oriented Strand Board, 23/32-inch)	$0.80-$1.25/sq ft	Cheapest option, consistent strength, large panel sizes available	Swells permanently when wet (worse than plywood), rough surface	Budget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available
AdvanTech/Engineered Subfloor	$2.00-$3.00/sq ft	Moisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty	More expensive, may not be stocked at all suppliers	Bathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty
Tongue-and-Groove Plywood (3/4-inch)	$1.25-$2.00/sq ft	Interlocking edges reduce squeaks, stronger joint, smoother surface	Costs more than standard CDX, harder to install in tight spaces	Open living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Subfloor Repair & Replacement

Denver Estimate

Typical Range

$1,047-$5,233

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per sq ft

$3-$10

This 1.05x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →