Cost to Subfloor Repair & Replacement in Columbus, OH

$880$4,400 in Columbus

12% below the national average · 0.88x cost multiplier

In Columbus, a subfloor repair & replacement runs $880 to $4,400 on average — about 12% below what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Columbus

Line ItemLowMidHigh
Cost per sq ft$3$5$9
Materials$220$704$1,760
Labor$352$1,320$3,080
Permits$0$88$176
Total$572-12% vs. national avg$2,112-12% vs. national avg$5,016-12% vs. national avg

Budget

Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.

Mid-Range

Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.

Premium

Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.

Material Options

Material prices below are national averages; availability in Columbus may shift costs slightly.

MaterialCost/UnitBest For
CDX Plywood (3/4-inch)$1.00-$1.50/sq ftStandard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types
OSB (Oriented Strand Board, 23/32-inch)$0.80-$1.25/sq ftBudget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available
AdvanTech/Engineered Subfloor$2.00-$3.00/sq ftBathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty
Tongue-and-Groove Plywood (3/4-inch)$1.25-$2.00/sq ftOpen living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface

Other Projects in Columbus

Columbus Estimate

Typical Range

$880$4,400

vs. National Average

12% below national

Cost Multiplier

0.88x

Cost Per sq ft

$3–$9

Estimates apply Columbus's 0.88x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →