How much does a subfloor repair & replacement cost in Albuquerque?

A subfloor repair & replacement in Albuquerque typically costs $925-$4,627, 7% below the $2,500 national average.

What is the cost per sq ft for a subfloor repair & replacement in Albuquerque?

Subfloor Repair & Replacement in Albuquerque typically costs $3-$9 per sq ft.

How long does a subfloor repair & replacement take?

A subfloor repair & replacement typically takes 1-3 days. The minimum timeline is 4 hours, and complex projects can run 2 weeks.

Can I DIY a subfloor repair & replacement?

DIY feasibility for a subfloor repair & replacement is rated Moderate.

Cost to Subfloor Repair & Replacement in Albuquerque, NM (2026)

If you’re budgeting a subfloor repair & replacement in Albuquerque, most projects run $925-$4,627, 7% below the $2,500 national average. What moves that number most is usually one thing: Size of Damaged Area. On its own it can swing the cost by $3 - $10 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Remove the existing floor covering yourself to save $1-$4/sq ft ($200-$800 on a typical room)

In the Southwest (where Albuquerque sits): Moderate costs.

$925-$4,627 in Albuquerque

7% below the national average · 0.93x cost multiplier

Expect to pay $925-$4,627 for a subfloor repair & replacement in Albuquerque, about 7% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Albuquerque prices.

Cost Breakdown in Albuquerque

Line Item	Low	Mid	High
Cost per sq ft	$3	$6	$9
Materials	$240	$768	$1,920
Labor	$362	$1,356	$3,164
Permits	$0	$96	$192
Total	$602-7% vs. national avg	$2,220-7% vs. national avg	$5,276-7% vs. national avg

Budget

Small patch repair (25-50 sq ft) of water-damaged plywood subfloor. Cut out damaged section, replace with matching plywood, secure to joists.

Mid-Range

Moderate area replacement (100-300 sq ft) of damaged subfloor with 3/4-inch CDX or tongue-and-groove plywood. Includes existing floor removal, joist inspection, and new subfloor installation.

Premium

Full room or multi-room subfloor replacement (300-600+ sq ft) including joist repair, mold remediation, new 3/4-inch AdvanTech or OSB subfloor, and glue-and-screw installation.

Material Options

Material prices below are national averages; availability in Albuquerque may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
CDX Plywood (3/4-inch)	$1.00-$1.50/sq ft	Industry standard, strong, widely available, accepts all flooring types	Swells when wet, can delaminate if exposed to moisture, heavier than OSB	Standard subfloor replacement in dry areasIndustry standard, strong, widely available, accepts all flooring types
OSB (Oriented Strand Board, 23/32-inch)	$0.80-$1.25/sq ft	Cheapest option, consistent strength, large panel sizes available	Swells permanently when wet (worse than plywood), rough surface	Budget replacements in areas with no moisture riskCheapest option, consistent strength, large panel sizes available
AdvanTech/Engineered Subfloor	$2.00-$3.00/sq ft	Moisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty	More expensive, may not be stocked at all suppliers	Bathrooms, kitchens, laundry rooms, and any area with moisture riskMoisture-resistant, won't swell, stiffer than plywood, 500-day weather exposure warranty
Tongue-and-Groove Plywood (3/4-inch)	$1.25-$2.00/sq ft	Interlocking edges reduce squeaks, stronger joint, smoother surface	Costs more than standard CDX, harder to install in tight spaces	Open living areas where squeak prevention mattersInterlocking edges reduce squeaks, stronger joint, smoother surface

Other Projects in Albuquerque

Central AC Installation

Roof Replacement (Asphalt Shingles)

Full Kitchen Remodel

Back to national average for Subfloor Repair & Replacement

Albuquerque Estimate

Typical Range

$925-$4,627

vs. National Average

7% below national

Cost Multiplier

0.93x

Cost Per sq ft

$3-$9

This 0.93x estimate prices Albuquerque labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →