How much does a hardwood floor refinishing cost in Salt Lake City?

A hardwood floor refinishing in Salt Lake City typically costs $905-$3,169, 9% below the $1,800 national average.

What is the cost per sq ft for a hardwood floor refinishing in Salt Lake City?

Hardwood Floor Refinishing in Salt Lake City typically costs $3-$7 per sq ft.

How long does a hardwood floor refinishing take?

A hardwood floor refinishing typically takes 3-5 days. The minimum timeline is 2 days, and complex projects can run 7 days.

Can I DIY a hardwood floor refinishing?

DIY feasibility for a hardwood floor refinishing is rated Partial.

Cost to Hardwood Floor Refinishing in Salt Lake City, UT (2026)

If you’re budgeting a hardwood floor refinishing in Salt Lake City, most projects run $905-$3,169, 9% below the $1,800 national average. What moves that number most is usually one thing: Refinish vs. Screen-and-Recoat. On its own it can swing the cost by $1.50 - $3.50 per sq ft difference, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Ask about a screen-and-recoat first - if your floors just look dull and don't have deep scratches, this $1-$3/sq ft option can buy you 5-10 more years without a full sand.

In the Mountain West (where Salt Lake City sits): Colorado's growth has pushed refinishing rates slightly above average. Wyoming and Idaho are close to national average.

$905-$3,169 in Salt Lake City

9% below the national average · 0.91x cost multiplier

Homeowners in Salt Lake City typically spend $905-$3,169 on a hardwood floor refinishing, about 9% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per sq ft	$3	$4	$7
Materials	$156	$312	$624
Labor	$490	$1,180	$2,273
Permits	$0	$0	$0
Total	$646-9% vs. national avg	$1,492-10% vs. national avg	$2,897-9% vs. national avg

Budget

Screen-and-recoat (no sanding) on a 200 sq ft room in good condition. This refreshes the finish without removing wood material.

Mid-Range

Full sand-and-refinish on 400 sq ft (living room and hallway), three coats of oil-modified polyurethane, minor board repairs included.

Premium

Full refinish on 600 sq ft, custom stain color, oil-based finish with five coats, hand-scraping or custom sheen, board replacement for damaged sections.

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Oil-Modified Polyurethane	$40-$70 per gallon	Amber warmth enhances wood grain, extremely durable, lower cost, most common choice	Strong VOC fumes require ventilation and 24-hour dry time per coat, yellows over time	Living rooms, dining rooms, high-traffic areas where durability mattersAmber warmth enhances wood grain, extremely durable, lower cost, most common choice
Water-Based Polyurethane	$50-$90 per gallon	Low odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application	Less durable than oil-based, needs more coats, higher material cost	Bedrooms, condos where fumes are a problem, light-colored wood species where clarity mattersLow odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application
Hardwax Oil	$60-$100 per gallon	Penetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish	Less protective than polyurethane, requires annual maintenance oil application, expensive	Wide-plank floors, rustic aesthetics, homeowners willing to do regular maintenancePenetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish
Acid-Cured Swedish Finish	$80-$120 per gallon	Extremely hard and durable, excellent for high-traffic commercial and residential use	Very strong fumes (must vacate for 3-5 days), requires professional application only, limited DIY option	Busy family homes, dogs, high-traffic main floors where maximum durability is the priorityExtremely hard and durable, excellent for high-traffic commercial and residential use

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Hardwood Floor Refinishing

Salt Lake City Estimate

Typical Range

$905-$3,169

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per sq ft

$3-$7

This 0.91x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →