Cost to Hardwood Floor Refinishing in Oklahoma City, OK
$880–$3,080 in Oklahoma City
12% below the national average · 0.88x cost multiplier
In Oklahoma City, a hardwood floor refinishing runs $880 to $3,080 on average — about 12% below what homeowners pay nationwide. The South Central market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Oklahoma City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $4 | $7 |
| Materials | $132 | $264 | $528 |
| Labor | $493 | $1,188 | $2,288 |
| Permits | $0 | $0 | $0 |
| Total | $625-12% vs. national avg | $1,452-12% vs. national avg | $2,816-12% vs. national avg |
Budget
Screen-and-recoat (no sanding) on a 200 sq ft room in good condition. This refreshes the finish without removing wood material.
Mid-Range
Full sand-and-refinish on 400 sq ft (living room and hallway), three coats of oil-modified polyurethane, minor board repairs included.
Premium
Full refinish on 600 sq ft, custom stain color, oil-based finish with five coats, hand-scraping or custom sheen, board replacement for damaged sections.
Material Options
Material prices below are national averages; availability in Oklahoma City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Oil-Modified Polyurethane | $40-$70 per gallon | Living rooms, dining rooms, high-traffic areas where durability mattersAmber warmth enhances wood grain, extremely durable, lower cost, most common choice |
| Water-Based Polyurethane | $50-$90 per gallon | Bedrooms, condos where fumes are a problem, light-colored wood species where clarity mattersLow odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application |
| Hardwax Oil | $60-$100 per gallon | Wide-plank floors, rustic aesthetics, homeowners willing to do regular maintenancePenetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish |
| Acid-Cured Swedish Finish | $80-$120 per gallon | Busy family homes, dogs, high-traffic main floors where maximum durability is the priorityExtremely hard and durable, excellent for high-traffic commercial and residential use |
Other Projects in Oklahoma City
Oklahoma City Estimate
Typical Range
$880–$3,080
vs. National Average
12% below national
Cost Multiplier
0.88x
Cost Per sq ft
$3–$7
Estimates apply Oklahoma City's 0.88x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →