Cost to Hardwood Floor Refinishing in Houston, TX (2026)
If you’re budgeting a hardwood floor refinishing in Houston, most projects run $836-$2,927, 16% below the $1,800 national average. What moves that number most is usually one thing: Refinish vs. Screen-and-Recoat. On its own it can swing the cost by $1.50 - $3.50 per sq ft difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Ask about a screen-and-recoat first - if your floors just look dull and don't have deep scratches, this $1-$3/sq ft option can buy you 5-10 more years without a full sand.
In the South (where Houston sits): Tennessee, Georgia, and the Carolinas have competitive refinishing markets at 10-15% below average. Florida coastal markets track closer to national average.
$836-$2,927 in Houston
16% below the national average · 0.84x cost multiplier
In Houston, a hardwood floor refinishing runs $836 to $2,927 on average - about 16% below what homeowners pay nationwide. The South market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Houston
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $4 | $7 |
| Materials | $144 | $288 | $576 |
| Labor | $452 | $1,090 | $2,100 |
| Permits | $0 | $0 | $0 |
| Total | $596-16% vs. national avg | $1,378-16% vs. national avg | $2,676-16% vs. national avg |
Budget
Screen-and-recoat (no sanding) on a 200 sq ft room in good condition. This refreshes the finish without removing wood material.
Mid-Range
Full sand-and-refinish on 400 sq ft (living room and hallway), three coats of oil-modified polyurethane, minor board repairs included.
Premium
Full refinish on 600 sq ft, custom stain color, oil-based finish with five coats, hand-scraping or custom sheen, board replacement for damaged sections.
Material Options
Material prices below are national averages; availability in Houston may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Oil-Modified Polyurethane | $40-$70 per gallon | Living rooms, dining rooms, high-traffic areas where durability mattersAmber warmth enhances wood grain, extremely durable, lower cost, most common choice |
| Water-Based Polyurethane | $50-$90 per gallon | Bedrooms, condos where fumes are a problem, light-colored wood species where clarity mattersLow odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application |
| Hardwax Oil | $60-$100 per gallon | Wide-plank floors, rustic aesthetics, homeowners willing to do regular maintenancePenetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish |
| Acid-Cured Swedish Finish | $80-$120 per gallon | Busy family homes, dogs, high-traffic main floors where maximum durability is the priorityExtremely hard and durable, excellent for high-traffic commercial and residential use |
Other Projects in Houston
Houston Estimate
Typical Range
$836-$2,927
vs. National Average
16% below national
Cost Multiplier
0.84x
Cost Per sq ft
$3-$7
This 0.84x estimate prices Houston labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →