Cost to Hardwood Floor Refinishing in Denver, CO (2026)
If you’re budgeting a hardwood floor refinishing in Denver, most projects run $1,042-$3,649, 4% above the $1,800 national average. What moves that number most is usually one thing: Refinish vs. Screen-and-Recoat. On its own it can swing the cost by $1.50 - $3.50 per sq ft difference, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Ask about a screen-and-recoat first - if your floors just look dull and don't have deep scratches, this $1-$3/sq ft option can buy you 5-10 more years without a full sand.
In the Mountain West (where Denver sits): Colorado's growth has pushed refinishing rates slightly above average. Wyoming and Idaho are close to national average.
$1,042-$3,649 in Denver
4% above the national average · 1.04x cost multiplier
Expect to pay $1,042-$3,649 for a hardwood floor refinishing in Denver, about 4% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.
Cost Breakdown in Denver
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $3 | $5 | $8 |
| Materials | $159 | $318 | $636 |
| Labor | $581 | $1,402 | $2,700 |
| Permits | $0 | $0 | $0 |
| Total | $740+4% vs. national avg | $1,720+4% vs. national avg | $3,336+4% vs. national avg |
Budget
Screen-and-recoat (no sanding) on a 200 sq ft room in good condition. This refreshes the finish without removing wood material.
Mid-Range
Full sand-and-refinish on 400 sq ft (living room and hallway), three coats of oil-modified polyurethane, minor board repairs included.
Premium
Full refinish on 600 sq ft, custom stain color, oil-based finish with five coats, hand-scraping or custom sheen, board replacement for damaged sections.
Material Options
Material prices below are national averages; availability in Denver may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Oil-Modified Polyurethane | $40-$70 per gallon | Living rooms, dining rooms, high-traffic areas where durability mattersAmber warmth enhances wood grain, extremely durable, lower cost, most common choice |
| Water-Based Polyurethane | $50-$90 per gallon | Bedrooms, condos where fumes are a problem, light-colored wood species where clarity mattersLow odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application |
| Hardwax Oil | $60-$100 per gallon | Wide-plank floors, rustic aesthetics, homeowners willing to do regular maintenancePenetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish |
| Acid-Cured Swedish Finish | $80-$120 per gallon | Busy family homes, dogs, high-traffic main floors where maximum durability is the priorityExtremely hard and durable, excellent for high-traffic commercial and residential use |
Other Projects in Denver
Denver Estimate
Typical Range
$1,042-$3,649
vs. National Average
4% above national
Cost Multiplier
1.04x
Cost Per sq ft
$3-$8
This 1.04x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →