Cost to Hardwood Floor Installation in Dallas, TX (2026)
If you’re budgeting a hardwood floor installation in Dallas, most projects run $2,658-$10,634, 11% below the $6,500 national average. What moves that number most is usually one thing: Wood Species. On its own it can swing the cost by $2,500 - $10,000 for 500 sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose red oak over exotic species. Red oak is the most affordable solid hardwood at $3-$7 per square foot, and it takes stain well enough to mimic pricier woods.
In the Southeast (where Dallas sits): Lower labor rates, strong contractor availability.
$2,658-$10,634 in Dallas
11% below the national average · 0.89x cost multiplier
In Dallas, a hardwood floor installation runs $2,658 to $10,634 on average - about 11% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $5 | $12 | $22 |
| Materials | $2,123 | $3,378 | $7,238 |
| Labor | $1,532 | $2,297 | $3,446 |
| Permits | $0 | $0 | $0 |
| Total | $3,655-19% vs. national avg | $5,675-19% vs. national avg | $11,167-11% vs. national avg |
Budget
Engineered oak, floating installation, minimal subfloor prep, standard layout for 500 sq ft
Mid-Range
Solid red oak, nail-down installation, stain to match existing trim, standard layout for 500 sq ft
Premium
Walnut or white oak, nail-down installation, custom stain, complex layout with borders or patterns for 500 sq ft
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Red Oak (Solid) | $3-$7/sq ft | Most homes, traditional or transitional stylesMost popular species, takes stain well, widely available, durable |
| White Oak (Solid) | $4-$10/sq ft | Modern and farmhouse styles, high-traffic areasHarder than red oak, water-resistant, modern aesthetic, ages beautifully |
| Maple (Solid) | $4-$9/sq ft | Contemporary spaces, light-colored floor plansVery hard and durable, light clean look, resists denting |
| Cherry (Solid) | $5-$12/sq ft | Formal rooms, traditional homesRich warm color, darkens beautifully with age, elegant grain |
| Walnut (Solid) | $7-$15/sq ft | Premium remodels, statement floorsRich dark color, premium look, unique grain patterns |
| Engineered Hardwood | $3-$14/sq ft | Basements, condos, over concrete, radiant heat systemsWorks over concrete and radiant heat, more stable in humidity, wide plank options |
| Bamboo | $4.50-$6.50/sq ft | Eco-conscious homeowners, modern spacesEco-friendly, very hard (strand-woven), affordable mid-range option |
Other Projects in Dallas
Dallas Estimate
Typical Range
$2,658-$10,634
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per sq ft
$5-$22
This 0.89x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →