Cost to Floor Leveling in Salt Lake City, UT (2026)
If you’re budgeting a floor leveling in Salt Lake City, most projects run $946-$7,572, 5% below the $2,800 national average. What moves that number most is usually one thing: Severity of Unevenness. On its own it can swing the cost by $2 - $30 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Remove existing flooring yourself before the contractor arrives to save $1-$3/sq ft ($200-$600 on a typical room)
In the Mountain West (where Salt Lake City sits): Moderate costs.
$946-$7,572 in Salt Lake City
5% below the national average · 0.95x cost multiplier
Homeowners in Salt Lake City typically spend $946-$7,572 on a floor leveling, about 5% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $2 | $7 | $28 |
| Materials | $416 | $1,248 | $3,120 |
| Labor | $437 | $1,399 | $3,934 |
| Permits | $0 | $0 | $208 |
| Total | $853-5% vs. national avg | $2,647-5% vs. national avg | $7,574-5% vs. national avg |
Budget
Self-leveling compound over a small area (100-200 sq ft) with minor dips up to 1/2 inch. Simple pour-and-spread application.
Mid-Range
Self-leveling compound over a larger area (300-500 sq ft) with dips up to 1 inch. Includes primer, multiple pours if needed, and proper surface prep.
Premium
Extensive leveling of severely uneven floors (500+ sq ft) with mud bed, structural shimming, or sistering of joists. May include subfloor repair and deep pours over 1.5 inches.
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Self-Leveling Compound | $2-$8/sq ft | Most residential leveling jobs with dips under 1.5 inchesFast application, smooth finish, handles dips up to 1.5 inches, compatible with most flooring |
| Sand/Cement Mud Bed | $6-$12/sq ft | Thick fills over 1.5 inches, especially under tileCan fill deeper depressions, traditional method, very strong when cured |
| Plywood Shimming/Underlayment | $4-$8/sq ft | Wood-framed floors with moderate unevenness over joistsGood for wood subfloors, adds structural support, fast installation |
| Joist Sistering/Structural Repair | $10-$30/sq ft | Severely sagging floors caused by damaged, undersized, or rotted joistsFixes the root cause, restores structural integrity, permanent solution |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$946-$7,572
vs. National Average
5% below national
Cost Multiplier
0.95x
Cost Per sq ft
$2-$28
This 0.95x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →