How much does a floor leveling cost in Boise?

A floor leveling in Boise typically costs $931-$7,449, 7% below the $2,800 national average.

What is the cost per sq ft for a floor leveling in Boise?

Floor Leveling in Boise typically costs $2-$28 per sq ft.

How long does a floor leveling take?

A floor leveling typically takes 1-3 days. The minimum timeline is 4 hours, and complex projects can run 2 weeks.

Can I DIY a floor leveling?

DIY feasibility for a floor leveling is rated Partial.

Cost to Floor Leveling in Boise, ID (2026)

If you’re budgeting a floor leveling in Boise, most projects run $931-$7,449, 7% below the $2,800 national average. What moves that number most is usually one thing: Severity of Unevenness. On its own it can swing the cost by $2 - $30 per sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Remove existing flooring yourself before the contractor arrives to save $1-$3/sq ft ($200-$600 on a typical room)

In the Mountain West (where Boise sits): Moderate costs.

$931-$7,449 in Boise

7% below the national average · 0.93x cost multiplier

Expect to pay $931-$7,449 for a floor leveling in Boise, about 7% below the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Boise prices.

Cost Breakdown in Boise

Line Item	Low	Mid	High
Cost per sq ft	$2	$7	$28
Materials	$410	$1,230	$3,075
Labor	$429	$1,374	$3,864
Permits	$0	$0	$205
Total	$839-7% vs. national avg	$2,604-7% vs. national avg	$7,452-7% vs. national avg

Budget

Self-leveling compound over a small area (100-200 sq ft) with minor dips up to 1/2 inch. Simple pour-and-spread application.

Mid-Range

Self-leveling compound over a larger area (300-500 sq ft) with dips up to 1 inch. Includes primer, multiple pours if needed, and proper surface prep.

Premium

Extensive leveling of severely uneven floors (500+ sq ft) with mud bed, structural shimming, or sistering of joists. May include subfloor repair and deep pours over 1.5 inches.

Material Options

Material prices below are national averages; availability in Boise may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Self-Leveling Compound	$2-$8/sq ft	Fast application, smooth finish, handles dips up to 1.5 inches, compatible with most flooring	Expensive for thick pours, requires proper priming, limited pour depth per application	Most residential leveling jobs with dips under 1.5 inchesFast application, smooth finish, handles dips up to 1.5 inches, compatible with most flooring
Sand/Cement Mud Bed	$6-$12/sq ft	Can fill deeper depressions, traditional method, very strong when cured	Labor-intensive, longer cure time (24-48 hours), heavier than self-leveling compound	Thick fills over 1.5 inches, especially under tileCan fill deeper depressions, traditional method, very strong when cured
Plywood Shimming/Underlayment	$4-$8/sq ft	Good for wood subfloors, adds structural support, fast installation	Can raise floor height significantly, limited to wood-frame floors, adds weight	Wood-framed floors with moderate unevenness over joistsGood for wood subfloors, adds structural support, fast installation
Joist Sistering/Structural Repair	$10-$30/sq ft	Fixes the root cause, restores structural integrity, permanent solution	Most expensive, invasive (may need ceiling removal below), requires permits	Severely sagging floors caused by damaged, undersized, or rotted joistsFixes the root cause, restores structural integrity, permanent solution

Other Projects in Boise

Composite Deck Building

Full Kitchen Remodel

Central AC Installation

Back to national average for Floor Leveling

Boise Estimate

Typical Range

$931-$7,449

vs. National Average

7% below national

Cost Multiplier

0.93x

Cost Per sq ft

$2-$28

This 0.93x estimate prices Boise labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →