Cost to Concrete Floor Polishing in Salt Lake City, UT

$1,620–$8,640 in Salt Lake City

8% above the national average · 1.08x cost multiplier

Homeowners in Salt Lake City typically spend $1,620–$8,640 on a concrete floor polishing, about 8% above the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per sq ft	$3	$9	$19
Materials	$324	$864	$2,160
Labor	$1,296	$2,700	$7,560
Permits	$0	$0	$0
Total	$1,620+8% vs. national avg	$3,564+8% vs. national avg	$9,720+8% vs. national avg

Budget

Basic grind and seal, cream polish level, 200 sq ft

Mid-Range

Grind, densify, polish to semi-gloss, 400 sq ft, dye option

Premium

Full aggregate exposure, high-gloss polish, dye, guard coat, 500 sq ft

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Grind-and-Seal (Basic)	$3-$6/sq ft installed	Fastest turnaround, good for industrial look, low maintenance	Not a true polished finish, surface sealer can wear and peel	Garages, basements, utility spacesFastest turnaround, good for industrial look, low maintenance
Cream Polish (Level 1)	$4-$7/sq ft installed	Smooth surface polish, good uniformity, hides imperfections	Paste aggregate visible, less dramatic than higher levels	Retail spaces, offices, finished basementsSmooth surface polish, good uniformity, hides imperfections
Salt-and-Pepper Polish (Level 2)	$5-$9/sq ft installed	Exposes fine aggregate, more visual interest, durable	Requires more passes, higher cost	Residential and commercial where visual appeal mattersExposes fine aggregate, more visual interest, durable
Full Aggregate Exposure (Level 3-4)	$8-$18/sq ft installed	Premium finish showing stone aggregate, high gloss, impressive look	Most expensive, requires good aggregate in existing slab	High-end residential, restaurants, showroomsPremium finish showing stone aggregate, high gloss, impressive look
Concrete Dye	$0.50-$1.50/sq ft materials	Wide color range, UV stable, semi-transparent	Adds to project cost and timeline, uneven results if concrete is porous	Adding color interest, hiding discolorationWide color range, UV stable, semi-transparent

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Concrete Floor Polishing

Salt Lake City Estimate

Typical Range

$1,620–$8,640

vs. National Average

8% above national

Cost Multiplier

1.08x

Cost Per sq ft

$3–$19

Estimates apply Salt Lake City's 1.08x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →