Cost to Stucco Repair in Austin, TX

$315–$3,150 in Austin

5% above the national average · 1.05x cost multiplier

Homeowners in Austin typically spend $315–$3,150 on a stucco repair, about 5% above the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Austin

Line Item	Low	Mid	High
Cost per sq ft	$8	$23	$53
Materials	$63	$368	$945
Labor	$200	$893	$2,730
Permits	$0	$0	$0
Total	$263+5% vs. national avg	$1,260+5% vs. national avg	$3,675+5% vs. national avg

Budget

Hairline crack repair or small patch under 10 sq ft. Pre-mixed patching compound, no texture matching required.

Mid-Range

Section replacement up to 50 sq ft with texture matching. Includes base coat, finish coat, and texture blending to match existing wall.

Premium

Large section or full wall repair over 100 sq ft. Full 3-coat stucco system or EIFS repair, color-matched finish coat, water damage remediation.

Material Options

Material prices below are national averages; availability in Austin may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pre-Mixed Stucco Patch Compound	$20-$50 per bucket (covers ~10-20 sq ft)	Easiest to apply, available at big-box stores, one-step process for small repairs	Difficult to texture match, not suitable for repairs over 10 sq ft, may crack if applied too thick	DIY hairline crack fill and small cosmetic patches under 5 sq ftEasiest to apply, available at big-box stores, one-step process for small repairs
Traditional 3-Coat Stucco System	$8-$18 per sq ft installed	Most durable long-term repair, matches original construction on older homes, breathable system that resists moisture buildup	Labor-intensive three-step process with cure time between coats, requires skilled plasterer to texture match	Any repair over 20 sq ft on traditionally stuccoed homes, structural crack repairsMost durable long-term repair, matches original construction on older homes, breathable system that resists moisture buildup
EIFS / Synthetic Stucco	$15-$30 per sq ft installed	Adds insulation value, seamless with existing EIFS systems when matched correctly, flexible finish coat resists hairline cracking	Must match original manufacturer's system, moisture can get trapped if not properly detailed at seams	Repairing existing EIFS systems installed after the 1980s; requires contractor with EIFS certificationAdds insulation value, seamless with existing EIFS systems when matched correctly, flexible finish coat resists hairline cracking
Elastomeric Coating	$1.50-$3.50 per sq ft	Bridges hairline cracks, waterproofs the entire surface, extends life of aging stucco without full replacement	Does not fix structural issues underneath, adds visible sheen if not tinted correctly, traps moisture if existing damage is not first repaired	Aging stucco with widespread hairline cracking where full replacement isn't in the budgetBridges hairline cracks, waterproofs the entire surface, extends life of aging stucco without full replacement

Other Projects in Austin

Central AC Installation

Full Kitchen Remodel

Composite Deck Building

Back to national average for Stucco Repair

Austin Estimate

Typical Range

$315–$3,150

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per sq ft

$8–$53

Estimates apply Austin's 1.05x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →