How much does a stamped concrete patio and driveway cost in St. Louis?

A stamped concrete patio and driveway in St. Louis typically costs $2,265-$6,692, 3% above the $3,800 national average.

What is the cost per sq ft for a stamped concrete patio and driveway in St. Louis?

Stamped Concrete Patio and Driveway in St. Louis typically costs $8-$21 per sq ft.

How long does a stamped concrete patio and driveway take?

A stamped concrete patio and driveway typically takes 3-5 days. The minimum timeline is 2-3 days, and complex projects can run 1-2 weeks.

Can I DIY a stamped concrete patio and driveway?

DIY feasibility for a stamped concrete patio and driveway is rated Not recommended - Stamped concrete is one of the few hardscape projects where DIY is strongly discouraged. You get one shot during the pour, and the timing of stamping is critical. Mistakes are permanent..

Cost to Stamped Concrete Patio and Driveway in St. Louis, MO (2026)

If you’re budgeting a stamped concrete patio and driveway in St. Louis, most projects run $2,265-$6,692, 3% above the $3,800 national average. What moves that number most is usually one thing: Pattern and Color Complexity. On its own it can swing the cost by $500 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Choose a single integral color with a standard release agent instead of multi-color staining to save $2-$5 per square foot

In the Midwest (where St. Louis sits): Shorter pouring season but lower labor rates balance out. Harsh winters mean resealing every 2-3 years is critical to prevent surface damage.

$2,265-$6,692 in St. Louis

3% above the national average · 1.03x cost multiplier

In St. Louis, a stamped concrete patio and driveway runs $2,265 to $6,692 on average - about 3% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in St. Louis

Line Item	Low	Mid	High
Cost per sq ft	$8	$13	$21
Materials	$846	$1,410	$2,632
Labor	$1,228	$2,009	$3,572
Permits	$0	$0	$0
Total	$2,074+4% vs. national avg	$3,607+3% vs. national avg	$6,674+3% vs. national avg

Budget

Single-color stamped concrete, basic pattern (ashlar slate or cobblestone), 300 sq ft patio, standard sealer

Mid-Range

Two-color stamped concrete with integral color and release agent contrast, medium pattern complexity, 300 sq ft patio, high-gloss sealer

Premium

Multi-color stamped and stained concrete with hand-carved accents, borders, and custom pattern, 300 sq ft patio, premium sealer with anti-slip additive

Material Options

Material prices below are national averages; availability in St. Louis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ashlar Slate Pattern	$8-$12 per sq ft installed	Classic look mimicking cut stone, works with many home styles, moderate pattern complexity	Very common (may look generic), requires good color selection to look realistic	Most homes, patios, pool decks, and walkways wanting a natural stone lookClassic look mimicking cut stone, works with many home styles, moderate pattern complexity
Cobblestone/Belgian Block Pattern	$10-$14 per sq ft installed	Old-world European charm, looks great for driveways and entryways, hides minor imperfections	Textured surface can be harder to clean, snow shoveling catches on deeper patterns	Driveways, front walkways, traditional and colonial style homesOld-world European charm, looks great for driveways and entryways, hides minor imperfections
Wood Plank Pattern	$10-$15 per sq ft installed	Mimics real wood decking without rot or maintenance, unique appearance, good for modern designs	Requires very skilled installer for realistic results, can look fake if poorly done	Pool decks, patios where you want a deck look without wood maintenanceMimics real wood decking without rot or maintenance, unique appearance, good for modern designs
Random Stone/Flagstone Pattern	$12-$18 per sq ft installed	Natural, organic appearance, each section looks unique, excellent for informal settings	More labor-intensive to stamp, hand-carved versions are very expensive, irregular joints trap debris	Garden patios, rustic settings, blending with natural landscapingNatural, organic appearance, each section looks unique, excellent for informal settings
Brick Running Bond Pattern	$9-$13 per sq ft installed	Timeless brick appearance at a fraction of real brick cost, works well with colonial and traditional homes	Can look repetitive on large areas, requires precise color matching to look like real brick	Traditional homes, front porches, entryways, homes already featuring real brickTimeless brick appearance at a fraction of real brick cost, works well with colonial and traditional homes

Other Projects in St. Louis

Full Kitchen Remodel

Basement Finishing

Roof Replacement (Asphalt Shingles)

Back to national average for Stamped Concrete Patio and Driveway

St. Louis Estimate

Typical Range

$2,265-$6,692

vs. National Average

3% above national

Cost Multiplier

1.03x

Cost Per sq ft

$8-$21

This 1.03x estimate prices St. Louis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →