Cost to Sprinkler System Installation in Denver, CO
$2,016–$7,840 in Denver
12% above the national average · 1.12x cost multiplier
Expect to pay $2,016–$7,840 for a sprinkler system installation in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.
Cost Breakdown in Denver
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $0 | $1 | $2 |
| Materials | $1,008 | $2,016 | $4,480 |
| Labor | $1,232 | $2,240 | $5,600 |
| Permits | $224 | $336 | $672 |
| Total | $2,464+12% vs. national avg | $4,592+12% vs. national avg | $11,312+12% vs. national avg |
Budget
Basic 4-zone system, under 5,000 sq ft, pop-up rotors, manual controller
Mid-Range
6-8 zone system, smart WiFi controller, rain sensor, pop-up heads and rotors
Premium
10+ zone system, drip zones for beds, smart weather-based controller, backflow preventer, full winterization
Material Options
Material prices below are national averages; availability in Denver may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Pop-Up Spray Heads | $3-$8/head materials | Small to medium lawn areas, irregular shapesEven coverage on turf, adjustable arc, wide availability |
| Rotor Heads (Gear-Driven) | $8-$25/head materials | Large turf areas, slopes, open lawn zonesCovers 15-50 ft radius, efficient for large turf areas, lower precipitation rate |
| Drip Emitters | $0.10-$0.50/emitter materials | Flower beds, shrubs, vegetable gardensMost water-efficient, targets roots directly, minimal evaporation |
| Smart WiFi Controller (Rachio, Hunter) | $150-$300 unit | All new installs - the upgrade cost pays back in water savings within 2-3 yearsWeather-adjusted scheduling, phone app, water usage tracking, utility rebates |
| Backflow Preventer (RPZ Valve) | $80-$250 unit + $100-$250 install | Required - non-negotiable for code complianceRequired by code in most jurisdictions, protects drinking water |
Other Projects in Denver
Denver Estimate
Typical Range
$2,016–$7,840
vs. National Average
12% above national
Cost Multiplier
1.12x
Cost Per sq ft
$0–$2
Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →