Cost to Retaining Wall Construction in Dallas, TX (2026)
If you’re budgeting a retaining wall construction in Dallas, most projects run $2,762-$9,207, 8% below the $5,500 national average. What moves that number most is usually one thing: Wall Height. On its own it can swing the cost by $1,500 - $10,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Build a terraced system of two 3-foot walls instead of one 6-foot wall to avoid engineering requirements and permit costs
In the Southeast (where Dallas sits): Mild frost lines and generally soft soil reduce excavation costs. Year-round construction season keeps labor rates lower.
$2,762-$9,207 in Dallas
8% below the national average · 0.92x cost multiplier
In Dallas, a retaining wall construction runs $2,762 to $9,207 on average - about 8% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $18 | $41 | $78 |
| Materials | $1,448 | $2,702 | $5,308 |
| Labor | $1,024 | $2,303 | $3,838 |
| Permits | $193 | $338 | $483 |
| Total | $2,665-8% vs. national avg | $5,826-8% vs. national avg | $11,077-8% vs. national avg |
Budget
Interlocking concrete block (Allan Block or similar), 3 ft tall, 50 linear feet, no engineering required, basic gravel backfill and drainage
Mid-Range
Natural stone or premium block, 4 ft tall, 50 linear feet, geogrid reinforcement, proper drainage system, landscape-ready cap
Premium
Natural stone or poured concrete, 6 ft tall, 50 linear feet, engineered design, full drainage system, geogrid layers, rebar reinforcement
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Interlocking Concrete Block | $20-$35 per linear ft (3 ft height) | Most residential applications, garden terracing, functional retaining up to 4 feetMost cost-effective, uniform appearance, no mortar needed, excellent drainage integration |
| Natural Stone (Fieldstone/Limestone) | $40-$70 per linear ft (3 ft height) | Front-yard walls visible from the street, upscale properties, blending with natural landscapesBeautiful natural appearance, ages well, each wall is unique, excellent curb appeal |
| Poured Concrete | $30-$55 per linear ft (3 ft height) | Tall walls over 6 feet, commercial-grade strength needs, modern or contemporary home stylesStrongest option, smooth modern appearance, can be formed to any shape, can add decorative finishes |
| Timber/Landscape Ties | $15-$25 per linear ft (3 ft height) | Garden terracing, short-term solutions, rural properties, DIY projects under 3 feetCheapest option, easy DIY installation, natural look, quick to build |
| Boulder Wall | $35-$60 per linear ft (3 ft height) | Wooded or natural settings, lakeside properties, slopes where a rustic look fits the landscapeVery natural appearance, extremely durable, minimal maintenance, no mortar needed |
Other Projects in Dallas
Dallas Estimate
Typical Range
$2,762-$9,207
vs. National Average
8% below national
Cost Multiplier
0.92x
Cost Per linear ft
$18-$78
This 0.92x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →